TYAN THUNDER K8SE Manual page 50

3.6.6 - I/O Device Configuration Sub-Menu
You can use this screen to select options for the I/O Device Configuration
settings. Use the up and down <Arrow> keys to select an item. Use the <Plus>
and <Minus> keys to change the value of the selected option.
Advanced
I/O Device Configuration
Serial port A:
Serial port B:
Mode:
Parallel port:
Mode:
Floppy disk controller:
Base I/O address:
F1: Help ¡ ô ¡ õ : Select Item
Esc: Exit ¡ ö ¡ ÷ : Select Menu Enter: Select
F10: Save and Exit
Feature
Serial port A/B
Mode
Parallel port
Mode
Floppy disk controller
Base I/O address
PhoenixBIOS Setup Utility
[Auto]
[Auto]
[Normal]
[Auto]
[ECP]
[Enabled]
[Primary]
-/+: Change Values
Sub-Menu
Option
Auto
Enabled
Disabled
Normal
IR
IRQ4
Auto
Enabled
Disabled
ECP
EPP
Output only
Bi-directional
Enabled
Disabled
Primary
Secondary
50
http://www.tyan.com
Item Specific Help
F9: Setup Defaults
Description
Configure serial port A/B
using options.
Set the mode for Serial
port B using options.
Configure parallel port
using options.
Set the mode for parallel
port using options.
Configure Floppy disk
controller using options.
Set the base I/O address
for parallel port.