TYAN THUNDER K8SE Manual page 24

Type B: SCREW RETENTION TYPE HEATSINK
1. After placing CPU back-plate and
adhesive interface material under
motherboard, place heatsink
retention frame on top of
motherboard. Align heatsink retention
frame screw hole with backplate
assembly standoffs. Place heatsink
inside plastic retention bracket. Place
metal clip over retention frame tab.
Repeat for other side.
2. Insert screw through metal clip.
BE SURE METAL CLIP IS LOCKED
ONTO RETENTION FRAME TAB.
3. Tighten screw through metal clip.
Repeat on the other side.
DO NOT OVER TIGHTEN.
After you have finished installing the
heatsink onto the processor and
socket, attach the end wire of the fan
(which should already be attached to
the heatsink) to the motherboard.
The following diagram illustrates how
to connect fans onto the
motherboard. Once you have
finished installing all the fans you
can connect your drives (hard drives,
CD-ROM drives, etc.) to your
motherboard.
24
http://www.tyan.com