Table of Contents
Advertisement
2.21 – Finishing Up
Congratulations on making it this far! You're finished setting up the hardware aspect of your
computer. Before closing up your chassis, make sure that all cables and wires are connected
properly, especially IDE cables and most importantly, jumpers.
Setting up your computer on a hardware level will probably be one of the easiest things to do if
you carefully followed these instructions.
In the rare circumstance that you experienced difficulty even though the instructions herein were
followed, you can find help by asking your vendor for assistance. If they are not available for
assistance, please check the support section at our website.
20
http://www.tyan.com
Advertisement
Table of Contents
