Jumper And Connector Settings; Acpi Wake-Up Jumper For - TYAN THUNDER I7505 Manual

2.2 – Jumper and Connector Settings
Jumper /
Function
Connector
J8 AUX Audio Connector
Enable/Disable Onboard Intel
J10
82540EM GbE NIC
J11 Fan Connector
ACPI Wake-up Jumper
J12
(PS/2 keyboard and PS/2
mouse)
ACPI Wake-up Jumper
J14 (USB Port-A, USB Port-B, USB
Port-C and USB Port-D)
J16 CD Audio Input Connector
J19 Fan Connector
J22 Fan Connector
J30 Slot- A PCI - X/PCI-2.2 Jumper
Slot-B, Slot - C and Onboard
J31
SCSI PCI-X/PCI-2.2 Jumper
J32 Fan Connector
J38 Fan Connector
J50 Clear CMOS Jumper
Fan Connector
J55
J60 Fan Connector
ACPI Wake-up Jumper
J65
(USB Port-E and USB Port-F)
J66 IEEE 1394 Connector
J69 LCD Connector
J71 Front Panel Audio Connector
J72 Chassis Intrusion Connector
J73 Front Panel USB Connector
J74 Front Panel Connector
Open: Enable (Default)
Close: Disable
With tachometer monitoring
Close Pin-1 and Pin-2 (Default)
PS/2 devices' ACPI S1 wake up
Close Pin-2 and Pin-3
PS/2 devices' ACPI S1/S4 wake up function
Close Pin-1 and Pin-2 (Default)
Rear panel USB devices' ACPI S1 wake up
Close Pin-2 and Pin-3
Rear panel USB devices' ACPI S1/S4 wake up
With tachometer monitoring
With tachometer monitoring
Open: PCI-X Compatible (Default)
Close: PCI-2.2 Compatible
Open: PCI-X Compatible (Default)
Close: PCI-2.2 Compatible
With tachometer monitoring
Without tachometer monitoring
Open: Normal (Default)
Close: Clear CMOS Mode
With tachometer monitoring
With tachometer monitoring
Close Pin-1 and Pin-2 (Default)
Front panel USB devices' ACPI S1 wake up
Close Pin-2 and Pin-3
Front panel USB devices' ACPI S1/S4 wake up
9
http://www.TYAN.com
Settings