Table of Contents
Advertisement
Available languages
Available languages
Disconnect the fixture from power and allow it to cool for 20 minutes.
-
Remove upper cover.
-
Vacuum or gently blow away dust and loose particles with compressed air.
-
Remove stuck particles with an unscented tissue or cotton swab moistened with glass cleaner or
-
distilled water. Do not rub the surface: lift the particles off with a soft repeated press.
Remove smoke, and other, residues with cotton swabs or unscented tissues moistened with
-
isopropyl alcohol. A commercial glass cleaner may be used, but residues must be removed with
distilled water. Clean with a slow circular motion from center to edge. Dry with a clean, soft and
lintfree cloth or compressed air.
Close the fixture cover and tighten the thumb screw, taking care not to trap any loose wires.
-
TECHNICAL DATA
PLFON200 – PLFON205
Power supply:
AC 230V – 50Hz
Lamp:
Dichroic 12V – 100W
Code:
PLLP10012D
Dimensions:
LxWxH mm.320x140x190
Weight:
kg. 2.9
10
Advertisement
Table of Contents
