Related Manuals for SEG SOLAR SEG BMD-TB Series
Summarization of Contents
General Information
Applicable Products
Lists the series of PV modules this guide applies to, including model numbers and dimensions.
Product Identification
Details on barcode stickers and labels on PV modules for identification and serial number verification.
Safety
General Safety Precautions
Covers safe handling, electrical hazards, storage conditions, and regulatory compliance during installation.
Handling Safety Guidelines
Instructions on how to safely lift, move, transport, and install modules without damage or injury.
Installation Safety
Details on module mounting, electrical connections, tool usage, and environmental considerations during installation.
Fire Safety
Guidelines on fire rating validity, local requirements, and avoiding flammable environments for safe installation.
Installation
General Installation Principles
Principles for installing modules in landscape/portrait modes, including spacing, tilt angle, and structural support.
Location and Angle Selection
Recommendations for optimal site selection, solar insolation, and module orientation for best energy generation.
Screw Installation
Guidance on using screws, bolts, and nuts for mounting PV modules, including torque specifications for M8 and M6 screws.
Clamp Installation
Instructions for fixing PV modules using clamps, bolts, and nuts, with torque values for M8 screws and types of clamps.
Tracker Installation
Information on SEG module compatibility with tracker systems and maximum load capacities for different hole distances.
Electrical Installation
Guidance for qualified personnel on safe DC voltage connections, wiring compatibility, and series/parallel string configurations.
Grounding
Procedures for properly grounding module frames using bonding or toothed washers and suitable grounding conductors.
Maintenance
Cleaning
Procedures for cleaning PV modules using soft materials, water, or compressed air, with safety precautions and method details.
Visual Inspection of Modules
Guidelines for visually inspecting modules for appearance defects like broken glass, backsheet issues, or cell corrosion.
Connector and Cable Inspection
Checks for connector encapsulation integrity and junction box sealing to ensure firm connections and protection from elements.
Need help?
Do you have a question about the SEG BMD-TB Series and is the answer not in the manual?
Questions and answers