Page 1
2022 V1.0 SEG SOLAR PHOTOVOLTAIC MODULE SEG SOLAR INC. (SEG) ADD: SEG Headquarter California office: 6200 Stoneridge Mall Rd., Ste 300 Pleasanton, CA 94588 SEG San Antonio, Texas office: 973 Isom Road San Antonio, TX 78216 T: 925-468-4198 www.segsolar.com...
2 SAFETY 2.1 GENERAL SAFETY 2.2 HANDLING SAFETY INSTALLATION GUIDE 2.3 INSTALLATION SAFETY 2.4 FIRE SAFETY SEG SOLAR PHOTOVOLTAIC MODULE 3 PRODUCT IDENTIFICATION 4 MECHANICAL INSTALLATION 4.1 GENERAL INSTALLATION PRINCIPLE 4.2 LOCATION AND ANGLE SELECTION 4.3 SCREW INSTALLATION 4.4 CLAMP INSTALLATION 4.5 ELECTRICAL INSTALLATION...
Page 3
• The PV modules shall be properly grounded in accordance with the instruc- tions in this Guide or the requirements of the National Electrical Code. Thank you for choosing SEG Solar Photovoltaic Modules (hereafter referred to • Installing PV modules requires specialized skills and knowledge. Installation “...
Page 4
UL INSTALLATION GUIDE FOR SEG UL INSTALLATION GUIDE FOR SEG PHOTOVOLTAIC MODULE PHOTOVOLTAIC MODULE • Do not drill holes in the frame. This may reduce the frame mechanical • Follow the safety regulations for all other system components, including wire strength and cause cells to crack due to vibration.
Do not install the PV modules in a location where it would be immersed in the PV module serial No. When you need support from SEG SOLAR for a particular water or constantly exposed to water from a sprinkler or fountain etc.
Page 6
UL INSTALLATION GUIDE FOR SEG UL INSTALLATION GUIDE FOR SEG PHOTOVOLTAIC MODULE PHOTOVOLTAIC MODULE 4.4.1 .Install module with clamps at longsides of frames For 182-BMA/BMD & 210 modules, four mounting holes are used for the frame in the standard industry, so as to facilitate customer installation.We used four mounting holes in the frame of 182-BMA/BMD &...
Page 7
UL INSTALLATION GUIDE FOR SEG UL INSTALLATION GUIDE FOR SEG PHOTOVOLTAIC MODULE PHOTOVOLTAIC MODULE For 210 modules, four mounting holes are used for the frame in the standard industry, so as to facilitate customer installation.We used four mounting holes in the frame of the 210 modules.
Page 8
UL INSTALLATION GUIDE FOR SEG UL INSTALLATION GUIDE FOR SEG PHOTOVOLTAIC MODULE PHOTOVOLTAIC MODULE Where common grounding hardware (nuts, bolts, star washers, spilt-ring lock washers, flat washers and the like) is used to attach a listed grounding/bonding WARNING Electrical Hazard device, the attachment must be made in conformance with the grounding This module produces electricity when exposed to light.
UL INSTALLATION GUIDE FOR SEG UL INSTALLATION GUIDE FOR SEG PHOTOVOLTAIC MODULE PHOTOVOLTAIC MODULE Clean the glass surface of the module regularly with clean water and a soft sponge or cloth. A mild, non-abrasive cleaning agent may be used to remove Landscape Portrait Module...
Need help?
Do you have a question about the SEG-6PA-XXXWW and is the answer not in the manual?
Questions and answers