Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for NEC LED-FE019i3-165
Summarization of Contents
Important Information
Safety Precautions and Warnings
Details safety precautions, warnings, and handling guidelines for optimal performance and to prevent injury.
Interpreting Safety Symbols
Explains the meaning of various warning, caution, and prohibition symbols used throughout the manual.
Recommended Use and Maintenance
LED Lamp and Pixel Card Handling
Guidelines for handling LED lamps and pixel cards, covering static electricity, moisture, and physical care.
Lamp Break-in Procedure
Describes the process of gradually increasing brightness for new LED modules to prevent damage from moisture.
Parts Identification and Model Information
Component Identification
Identifies key components like interface connectors, status lamps, and handles with their functions.
Model Name and Frame Set Mapping
Lists available model names and their corresponding frame set configurations for easy reference.
Installation Procedures
Installation Site Requirements
Specifies requirements for installation location, including structural support, ventilation, and temperature control.
Cabinet Handling and Anchor Point Marking
Instructions for using cabinet handles and marking wall anchor points accurately for secure mounting.
Mounting Bar and Power Bar Setup
Steps for installing mounting bars and power bars, ensuring structural support and electrical distribution.
Cabinet Hanger Pin and Mounting Procedures
Procedures for installing cabinet hanger pins and mounting cabinets, ensuring proper alignment and secure attachment.
Assembly Diagrams and Wiring
Assembly Diagrams for Frame Sets
Visual guides illustrating the assembly process for various frame set sizes (4x4, 5x5, 6x6, 8x8).
Wiring and Connection Specifications
Specifies maximum signal and power connection limits per cable to prevent overload and ensure safe operation.
Screen Configuration and Software Setup
NovaLCT Software Setup and Login
Steps to prepare and install the NovaLCT control software, including login and initial setup.
Module Connection Settings in NovaLCT
Guide to configuring module connections within NovaLCT, including screen type, port settings, and module mapping.
Receiving Card Setup and Calibration
Instructions for configuring receiving cards, loading files, and updating calibration data.
Image Settings and Calibration
Image Settings: Brightness, Gamma, Color
Adjusting screen brightness, gamma correction for dark tones, and color temperature for desired hues.
Advanced Line Calibration
Step-by-step guide to performing line calibration to correct visible bright or dark lines between modules or pixel cards.
Cleaning and Maintenance
LED Screen Cleaning Methods
Method for cleaning LED screens using appropriate tools to maintain brightness and homogeneity.
Component Maintenance and Replacement Procedures
Procedures for maintaining and replacing key components like pixel cards, hub boards, power units, and receiving cards.
Troubleshooting and Monitoring
Troubleshooting Display and Color Problems
Diagnosing and resolving problems related to display, image, and color differences on LED modules.
Monitoring System Status and Health
Using software to monitor system status, identify problems with controllers, modules, temperature, or communication.
Redundancy Configuration
Redundancy Configuration for Dual Controllers
Steps to configure redundancy settings for two LED controllers connected via LAN or USB for failover protection.
Need help?
Do you have a question about the LED-FE019i3-165 and is the answer not in the manual?
Questions and answers