Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for HIKVISION DS-2XS6A47G1-LS/4G
Summarization of Contents
Legal Information
About this Document
Provides information about the document's purpose, content, and disclaimers.
About this Product
Details warranty, after-sales service, and product-specific information.
Acknowledgment of Intellectual Property Rights
States Hikvision's ownership of copyrights, patents, and trademarks.
LEGAL DISCLAIMER
Outlines legal disclaimers regarding product use and liability.
Chapter 2 Device Activation and Accessing
Activate Device via SADP
Instructions for activating the device using the SADP software.
Activate Device via Browser
Steps to activate the device using a web browser.
Login
Procedure for logging into the device.
Plug-in Installation
Details on installing necessary plug-ins for browser access.
Admin Password Recovery
Methods for resetting the admin password via security question or email.
Illegal Login Lock
Configuration to enhance security by locking out illegal login attempts.
Chapter 3 Live View
Live View Parameters
Overview of parameters for live view functionality.
Enable and Disable Live View
Quickly enable or disable live view for all channels.
Adjust Aspect Ratio
Steps to adjust the aspect ratio of the live view image.
Live View Stream Type
Selecting the appropriate live view stream type.
Select Third-Party Plug-in
Changing plug-ins for live view compatibility with browsers.
Window Division
Options for dividing the live view into multiple windows.
Light
Function to turn on or off the illuminator.
Count Pixel
Measuring the height and width of a selected region in the live view.
Start Digital Zoom
Enabling digital zoom to view detailed areas of the image.
Auxiliary Focus
Improving image clarity for motorized devices by adjusting focus.
Lens Initialization
Resetting the lens for motorized devices to correct focus issues.
Quick Set Live View
Provides quick setup for PTZ, display, OSD, and audio/video settings.
Lens Parameters Adjustment
Adjusting lens focus, zoom, and iris settings.
Conduct 3D Positioning
Relocating a selected area to the image center with zoom adjustments.
Set Transmission Parameters
TCP
Ensures data delivery and quality in stable network environments.
UDP
Suitable for unstable networks where high video fluency is not critical.
MULTICAST
For group communication with multiple clients.
HTTP
For third-party access to device streams.
Play Performance
Settings for balancing delay, fluency, and custom frame rates.
Chapter 4 Video and Audio
Video Settings
Configuration of video parameters like stream type, encoding, and resolution.
Stream Type
Specifying parameters for Main, Sub, and Other streams.
Video Type
Selecting whether to include audio content in the stream.
Resolution
Choosing video resolution based on needs and bandwidth.
Bitrate Type and Max. Bitrate
Settings for constant or variable bitrate and maximum bitrate.
Video Quality
Configuring video quality when using variable bitrate.
Frame Rate
Setting the video stream update frequency (fps).
Video Encoding
Selecting compression standards like H.264 and MJPEG.
H.264+
Improved H.264 compression for reduced storage.
H.265
High Efficiency Video Coding for better compression.
H.265+
Improved H.265 compression for reduced storage.
I-Frame Interval
Defines the number of frames between I-frames for encoding.
SVC
Scalable Video Coding for adaptive bitstream quality.
MPEG4
Video compression format developed by MPEG.
MJPEG
Video compression using intraframe coding.
Profile
Impact of profile complexity on image quality and bandwidth.
Smoothing
Adjusting stream smoothness for fluency versus video quality.
Audio Settings
Audio Encoding
Selecting the audio encoding compression method.
Audio Input
Configuring audio input for LineIn or MicIn devices.
Audio Output
Managing audio output volume and enabling/disabling the output.
Environmental Noise Filter
Enabling or disabling the filter for environmental noise.
Display Settings
Scene Mode
Predefined image parameter sets for different installation environments.
Image Adjustment
Adjusting brightness, saturation, hue, contrast, and sharpness.
Exposure Settings
Controlling image exposure via iris, shutter, and photosensitivity.
Day/Night Switch
Configuring color/B&W images for day and night modes.
Scheduled-Switch
Setting time periods for day mode.
Triggered by alarm input
Switching modes based on alarm input signals.
Triggered by video
Switching modes based on ambient light conditions.
Supplement Light Settings
Smart Supplement Light
Avoiding overexposure with intelligent supplement light control.
Supplement Light Mode
Selecting IR, White, Mixed, Smart, or Off modes.
Brightness Adjustment Mode
Setting brightness automatically or manually.
Gray Scale
Choosing the range for gray scale values.
Rotate
Rotating the live view image by 90° counterclockwise.
BLC
Backlight Compensation to improve visibility of dark objects.
WDR
Wide Dynamic Range for clear images in high contrast lighting.
HLC
High Light Compression to balance bright and dark areas.
White Balance
Adjusting color temperature for accurate color rendition.
DNR
Digital Noise Reduction for improving image quality.
Expert
Detailed DNR settings for space and time noise reduction.
Defog
Enhancing image clarity in foggy or misty environments.
Mirror
Flipping the live view image horizontally or vertically.
Image Parameters Switch
Set Switch
Steps to configure the automatic switching of image parameters.
OSD
Displayed Information
Configuring what information to display on screen.
Text Overlay
Adding custom text overlays to the image.
OSD Parameters
Adjusting OSD display mode, size, font, and alignment.
Chapter 5 Video Recording and Picture Capture
Storage Settings
Configuration of common storage paths for recording and captures.
Set New or Unencrypted Memory Card
Initializing and encrypting memory cards for storage.
Detect Memory Card Status
Checking remaining lifespan and health status of the memory card.
R/W Lock
Setting read/write permissions for the memory card.
Set FTP
Configuring the FTP server for saving captured images.
FTP Protocol
Selecting FTP or SFTP for secure file uploading.
Server Address and Port
Entering FTP server address and port.
User Name and Password
Providing FTP user credentials for uploading.
Directory Structure
Defining the saving path for snapshots on the FTP server.
Picture Filing Interval
Setting an interval for filing pictures in folders.
Picture Name
Customizing naming rules for captured pictures.
Set NAS
Configuring network attached storage for saving files.
Server Address
Entering the IP address of the network disk.
File Path
Specifying the saving path on the network disk.
Mounting Type
Selecting file system protocol for network disk access.
eMMC Protection
Stopping eMMC usage when its health status is poor.
Set Cloud Storage
Uploading captured pictures and data to the cloud.
Video Recording
Operations for manual and scheduled video recording.
Record Automatically
Configuring automatic video recording based on time periods or events.
Continuous
Recording video continuously according to the schedule.
Motion
Recording triggered by motion detection.
Alarm
Recording triggered by alarm input.
Motion | Alarm
Recording triggered by motion or alarm input.
Motion & Alarm
Recording triggered by both motion and alarm input.
Event
Recording triggered by configured events.
Overwrite
Enabling overwriting of old records when storage is full.
Pre-record
Setting the duration to record before a scheduled event.
Post-record
Setting the duration to record after a scheduled event.
Stream Type
Selecting the stream type for recording.
Recording Expiration
Setting automatic deletion of recordings after a specified time.
Record Manually
Starting and stopping video recording manually.
Playback and Download Video
Searching, playing, and downloading stored video files.
Capture Configuration
Capture Automatically
Setting up automatic picture capture based on time or events.
JPEG
Using JPEG format for smaller picture sizes.
BMP
Using BMP format for good quality pictures.
Capture Manually
Manually capturing pictures.
Chapter 6 Event and Alarm
Basic Event
Configuration of basic event detection like motion and tampering.
Set Motion Detection
Detecting moving objects to trigger linkage actions.
Expert Mode
Configuring advanced motion detection parameters.
Day/Night Switch
Switching between day and night modes automatically.
Normal Mode
Setting motion detection parameters using default device configurations.
Set Video Tampering Alarm
Detecting and alarming when the configured area is covered.
Set PIR Alarm
Triggering alarms based on Passive Infrared (PIR) detection.
Set Angle Deviation Detection
Detecting changes in device angle (tilting, rotating).
Set Exception Alarm
Configuring alarms for exceptions like network disconnection or HDD errors.
Set Alarm Input
Handling alarm signals from external devices.
Smart Event
Setting advanced smart event detection types.
Detect Audio Exception
Detecting abnormal sound events like sudden increase/decrease in intensity.
Sudden Decrease of Sound Intensity Detection
Detecting sudden drops in sound intensity.
Detect Scene Change
Detecting changes in the scene to trigger alarms.
Set Intrusion Detection
Detecting objects entering or loitering in a defined virtual region.
Sensitivity
Configuring sensitivity for intrusion detection.
Threshold
Setting the time threshold for loitering objects.
Set Line Crossing Detection
Detecting objects crossing a predefined virtual line.
Direction
Defining the direction of line crossing detection.
Sensitivity
Configuring sensitivity for line crossing detection.
Detection Target
Specifying targets for detection.
Target Validity
Setting validity for target features to improve accuracy.
Set Region Entrance Detection
Detecting objects entering a predefined virtual region.
Detection Target
Specifying targets for region entrance detection.
Target Validity
Setting validity for target features in region entrance detection.
Set Region Exiting Detection
Detecting objects exiting a predefined virtual region.
Detection Target
Specifying targets for region exiting detection.
Target Validity
Setting validity for target features in region exiting detection.
Set Unattended Baggage Detection
Detecting objects left unattended in a predefined region.
Set Object Removal Detection
Detecting when objects are removed from a predefined region.
Sensitivity
Configuring sensitivity for object removal detection.
Threshold
Setting the time threshold for object removal detection.
Draw Area
Defining detection regions by drawing areas on the live view.
Set Size Filter
Setting size filters for targets to trigger alarms.
Chapter 7 Network Settings
TCP/IP
Configuring TCP/IP settings for IPv4 and IPv6.
NIC Type
Selecting the Network Interface Card type.
IPv4
Configuring IPv4 modes: DHCP or Manual.
IPv6
Configuring IPv6 modes: Route Advertisement, DHCP, or Manual.
MTU
Setting the Maximum Transmission Unit for network packets.
DNS
Configuring DNS servers for domain name resolution.
Dynamic Domain Name
Enabling dynamic domain name registration.
Multicast
Configuring multicast settings for group communication.
Multicast Discovery
Enabling automatic detection of network cameras via multicast.
SNMP
Setting up Simple Network Management Protocol for device information.
Set SRTP
Configuring Secure Real-time Transport Protocol for secure communication.
Port Mapping
Setting up port mapping to access devices through specified ports.
Set Auto Port Mapping
Configuring automatic port mapping using UPnP.
Set Manual Port Mapping
Configuring manual port mapping with external and internal ports.
Set Port Mapping on Router
Steps for configuring port mapping on a router.
Port
Modifying device ports to resolve network port conflicts.
Access to Device via Domain Name
Using Dynamic DNS (DDNS) for network access via domain name.
DynDNS
Using DynDNS for domain name resolution.
NO-IP
Using NO-IP for domain name resolution.
Access to Device via PPPoE Dial Up Connection
Configuring PPPoE parameters for ADSL dial-up connection.
Dynamic IP
Display of dynamic WAN IP address after PPPoE dial-up.
User Name
Entering username for dial-up network access.
Password
Entering password for dial-up network access.
Wireless Dial
Transferring data via 3G/4G wireless network.
Set Wireless Dial
Configuring the built-in wireless module for dial-up Internet access.
Dial Parameters
Configuring and saving dial-up parameters.
Dial Plan
Setting detailed information for dial plans.
Dial Status
Checking and managing the status of the wireless dial connection.
Wireless Expert Settings
Advanced settings for troubleshooting 3G/4G wireless network issues.
Cell Radio Frequency Parameters
Viewing current wireless network information.
Network Info
Displaying current cellular network information.
Radio Frequency Fluctuation
Recording and exporting cellular network fluctuation reports.
Lock Band
Locking frequency bands to improve network speed.
WLAN AP (Access Point)
Using the device as a wireless access point.
Set WLAN AP
Configuring the WLAN AP mode, SSID, security, and password.
Access to Device via AP
Accessing the device via its AP when network connection is unavailable.
Traffic Shaping
Shaping and smoothing video data packets for better quality.
Data Monitoring
Viewing and managing SIM card or wired network data usage.
Set Network Service
Controlling the ON/OFF status of certain network protocols.
Set Open Network Video Interface
Configuring user settings for the ONVIF protocol.
Set Alarm Server
Configuring the device to send alarms to a destination server.
Set ISUP
Registering and managing the device on the ISUP platform.
Set OTAP
Accessing the maintenance platform via OTAP protocol.
Access Camera via Hik-Connect
Connecting the camera to the Hik-Connect mobile application.
Enable Hik-Connect Service on Camera
Enabling Hik-Connect service via web browser or SADP software.
Set Up Hik-Connect
Steps to install and set up the Hik-Connect application.
Add Camera to Hik-Connect
Adding the camera to the Hik-Connect account.
Chapter 8 Arming Schedule and Alarm Linkage
Set Arming Schedule
Setting the valid time periods for device tasks and alarms.
Linkage Method Settings
Enabling linkage functions triggered by events or alarms.
Trigger Alarm Output
Sending alarm information to connected alarm output devices.
Manual Alarm
Manually triggering an alarm output.
Automatic Alarm
Automatically triggering alarm output based on arming schedule.
FTP/NAS/Memory Card Uploading
Sending alarm information to FTP/NAS/memory card.
Send Email
Configuring the device to send email notifications for alarm events.
Attached Image
Configuring email notifications to include alarm pictures.
Notify Surveillance Center
Uploading alarm information to a surveillance center.
Trigger Recording
Recording video when an alarm event is detected.
Audible Warning
Enabling audible warnings for alarm events.
Set Audible Alarm Output
Configuring sound types and audio files for audible alarms.
Chapter 9 System and Security
View Device Information
Viewing device details like model, serial number, and firmware version.
Search and Manage Log
Searching and managing device logs for troubleshooting.
Simultaneous Login
Setting the maximum number of simultaneous web users.
Import and Export Configuration File
Importing/exporting configuration files for batch setup.
Export Diagnose Information
Exporting diagnostic information including logs and system status.
Diagnosis
Diagnosing communication packets and device power/network information.
Capture Device Packet
Capturing communication packets for debugging.
Export Device Info.
Exporting device information like voltage, current, and 4G data.
Reboot
Rebooting the device via the web browser.
Restore and Default
Restoring device parameters to factory default settings.
Upgrade
Upgrading the device firmware using an upgrade package.
Device Auto Maintenance
Configuring automatic device maintenance and restarts.
View Open Source Software License
Viewing the licenses for open source software used by the device.
Time and Date
Configuring time zone, synchronization, and daylight saving time.
Synchronize Time Manually
Manually setting or synchronizing the device time with a PC.
Set NTP Server
Using an NTP server for accurate time synchronization.
Synchronize Time by Satellite
Synchronizing device time using satellite signals.
Set DST
Configuring Daylight Saving Time settings.
Set RS-485
Connecting external devices using RS-485 for long-distance communication.
Set RS-232
Connecting devices using RS-232 for short-distance communication.
Metadata
Enabling metadata uploading for smart events and road traffic.
Power Output Mode
Setting the power output mode for external devices.
Location Settings
Configuring automatic uploading of device location (longitude/latitude).
Wiegand
Selecting Wiegand protocol for license plate number output.
Power Consumption Mode
Switching power consumption modes (Performance, Standby, Proactive).
Security
Improving system security through various security parameters.
Authentication
Configuring RTSP and WEB authentication protocols.
WEB Digest Algorithm
Selecting digest algorithms for WEB authentication.
Set IP Address Filter
Configuring IP address filters for access control.
Set HTTPS
Enabling HTTPS for secure encrypted access.
Set QoS
Configuring Quality of Service for network delay and congestion.
Set IEEE 802.1X
Enabling IEEE 802.1x for port-based network access control.
Control Timeout Settings
Setting timeout periods for user sessions.
Search Security Audit Logs
Searching security audit logs for intrusion and events.
SSH
Enabling Secure Shell (SSH) for network services.
Certificate Management
Managing server/client certificates and CA certificates.
Create Self-signed Certificate
Creating self-signed certificates for the device.
Create Certificate Request
Generating certificate requests for server/client certificates.
Import Certificate
Importing server/client certificates.
Install Server/Client Certificate
Installing server/client certificates.
Install CA Certificate
Installing CA certificates.
Enable Certificate Expiration Alarm
Setting up alarms for expiring or expired certificates.
User and Account
Managing user accounts and permissions.
Set User Account and Permission
Adding, modifying, or deleting user accounts and assigning permissions.
Administrator
Permissions and capabilities of the administrator account.
User
Permissions assigned to regular user accounts.
Operator
Permissions assigned to operator accounts.
Modify
Changing user passwords and permissions.
Delete
Deleting user accounts.
Simultaneous Login
Setting the maximum number of users logging into the system simultaneously.
Online Users
Viewing the list of currently logged-in users.
Chapter 10 VCA Resource
Allocate VCA Resource
Enabling and allocating resources for desired VCA functions.
Set Camera Info
Customizing device information for identification.
Smart Event
Configuration of various smart event detection types.
Set Intrusion Detection
Detecting objects entering or loitering in a defined virtual region.
Sensitivity
Configuring sensitivity for intrusion detection.
Threshold
Setting the time threshold for loitering objects.
Set Line Crossing Detection
Detecting objects crossing a predefined virtual line.
Direction
Defining the direction of line crossing detection.
Sensitivity
Configuring sensitivity for line crossing detection.
Detection Target
Specifying targets for detection.
Target Validity
Setting validity for target features to improve accuracy.
Set Region Entrance Detection
Detecting objects entering a predefined virtual region.
Detection Target
Specifying targets for region entrance detection.
Target Validity
Setting validity for target features in region entrance detection.
Set Region Exiting Detection
Detecting objects exiting a predefined virtual region.
Detection Target
Specifying targets for region exiting detection.
Target Validity
Setting validity for target features in region exiting detection.
Set Unattended Baggage Detection
Detecting objects left unattended in a predefined region.
Sensitivity
Configuring sensitivity for unattended baggage detection.
Threshold
Setting the time threshold for unattended baggage detection.
Set Object Removal Detection
Detecting when objects are removed from a predefined region.
Sensitivity
Configuring sensitivity for object removal detection.
Threshold
Setting the time threshold for object removal.
Road Traffic
Monitoring road traffic with vehicle and mixed-traffic detection.
Set Vehicle Detection
Detecting vehicles and capturing license plates.
Entrance/Exit
Uploading license plate info for vehicles passing detection area.
City Street
Uploading license plate info for vehicles in city streets.
Alarm Input
Using alarm input to trigger license plate capture.
Detection mode
Selecting the detection mode for vehicle analysis.
Set Mixed-Traffic Detection Rule
Detecting motor and non-motor vehicles in lanes.
Uploading Pictures Settings
Setting image parameters for captured traffic images.
Chapter 11 Smart Display
Live View Parameter
Icons and functions for live view controls.
Download Display Pictures
Downloading captured pictures from the browser cache.
Layout
Choosing display content for the smart display page.
Detect Feature
Displaying features of detected targets.
Need help?
Do you have a question about the DS-2XS6A47G1-LS/4G and is the answer not in the manual?
Questions and answers