Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Brunner EAS
Summarization of Contents
SYSTEM DESCRIPTION
Display
Describes the EOS 8 display interface with navigation bars and fields.
Functional Principle myBRUNNER Local
Explains how to access and query the system via myBRUNNER local function.
OPERATION
Menu and Basic Functions
Explains how basic functions of the EOS can be programmed via the menu.
Combustion Log
Details the indication, cause, and action for combustion log entries.
Display Customization
Describes how the EOS 8 display is customizable with different options.
Eco-Function
Explains how to activate and use the Eco-function for wood heating.
Lighting Fire in a Cold Fireplace
Provides instructions for safely lighting a fire in a cold fireplace.
Adding Fuel in a Warm Fireplace
Guides on how to add fuel to a warm fireplace for continued combustion.
Operation Modes
Explains switching between winter/summer modes and priority switching.
Type of Wood
Explains how wood type affects combustion and damper operation.
Remote Access Setup and Use
Guides on remote access setup, registration, login, service access, and sync.
Registration
Guides on how to register for online access via the myBRUNNER portal.
Logging In to myBRUNNER
Instructions for logging into the myBRUNNER portal using email and password.
Enabling for Service Access
How to grant service access to technicians using a fixed Service PIN Code.
Registration of your Brunner System
Control Unit Registration Steps
Outlines the steps for registering the control unit via the web portal.
Complete Registration on Touch Display
Confirms the successful registration process on the touch display.
EMERGENCY OPERATION
Heating with Manually Controlled Combustion Air Supply
How to manually control combustion air supply during power failure or device errors.
UPDATE OF THE CONTROL UNIT
Software from PC to USB-Stick
Steps to download software from a PC onto a USB stick.
Software from USB-Stick on Control Unit
Procedure for updating the control unit using software from a USB stick.
Variant 1
Procedure for updating the control unit with power supply connected.
Variant 2
Procedure for updating the control unit with power supply disconnected.
What to Do If Update Does Not Start
Troubleshooting steps if the software update process fails.
Need help?
Do you have a question about the EAS and is the answer not in the manual?
Questions and answers