Connections - Teac W-890R Owner's Manual

Connections

L R R
REC PLAY
TAPE
CAUTION
< Plug the power cord into an AC outlet only after having made all
other connections.
< Read the instructions of each component you intend to use with
this unit.
Use RCA cables to make connections between this unit and your
amplifier. Make sure to connect:
White plug to White jack (L: left channel)
Red plug to Red jack (R: right channel)
NOTE
Plugs must be firmly inserted into the corresponding jacks. Do not
bundle the RCA cables together with the power cord and speaker
cables. Doing so will degrade sound quality or generate noise.
VOLTAGE SELECTOR
Switches the voltage to either 230 V or 120 V.
NOTE
< The voltage selector is not available on units for some
markets.
IN NORTH AMERICA
USE ONLY ON 120V SUPPLY
1
L
2
AC power cord
Plug this AC power cord into an AC wall socket.
NOTE
< Hold the power plug when plugging or unplugging the power
cord. Never pull or yank on the power cord.
< Unplug the power cord when you are not going to use the unit for
some time.
3
7