Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Behncke WTI
Summarization of Contents
Important basic information
General
General introduction and instructions for safe product use and handling.
Symbols and signal words
Explains safety symbols and signal words used in the manual.
Copyright protection
Information regarding copyright and intellectual property rights of the manual's content.
Terms of warranty
Details warranty terms based on current German legal regulations.
Product liability
States that errors are excepted and subject to technical changes.
General information and safety information
Product-related information
Describes the intended use and specific applications for QWT, SWT, and WTI heat exchangers.
Dangers when handling the heat exchanger
Outlines potential risks and necessary precautions when handling the heat exchanger.
Safety measures at the installation site
Specifies safety requirements for the installation location and operating pressures.
Technical data
QWT 100
Provides technical specifications, output, pump capacity, and pressure loss for QWT 100 models.
SWT 100
Lists technical data, output, pump capacity, and pressure loss for SWT 100 models.
SWT 100 titanium
Details technical data for SWT 100 titanium, including chloride resistance.
WTI 100
Presents technical data, output, pump capacity, and pressure loss for WTI 100 models.
Supercharged
Provides technical data for the Supercharged models, highlighting efficiency and calcification resistance.
Installation and connection dimensions
Transport and storage
Instructions on how to safely transport and store the heat exchanger.
Installation
Installation arrangement above the water level
Illustrates horizontal and vertical installation positions above the water level.
Installation arrangement below the water level
Shows horizontal installation configuration below the water level.
Connecting the heat exchanger
Provides instructions and cautions for connecting the heat exchanger to external circuits.
Connecting WTI / SWT / QWT to a circulation pump / filter system
Details the connection process for specific models to pump/filter systems.
Connecting QWT 100-140/100-209 and WTI 100-140/100-209 to a filter system
Specific connection instructions for larger models to filter systems.
Start-up
Steps and precautions before and during the initial start-up of the heat exchanger.
Function
Explains the operational principle of the heat exchanger for different models.
Maintenance and servicing
Storing the heat exchanger over winter in frost-free rooms
Instructions for storing the heat exchanger in frost-free conditions.
Store the heat exchanger over winter in spaces at risk of frost
Procedures for storing the unit in areas susceptible to freezing.
Emptying the heat exchanger in a vertical position
Steps to completely drain the heat exchanger when in a vertical orientation.
Emptying the heat exchanger in a horizontal position
Instructions for emptying the heat exchanger when positioned horizontally.
Need help?
Do you have a question about the WTI and is the answer not in the manual?
Questions and answers