Related Manuals for CLIVET WiSAN-YSE1 18.2
Summarization of Contents
Safety Considerations
Safety Practices
Essential safety practices and personal protective equipment.
Manual Usage Importance
Importance of reading and following the manual for correct operation.
Risk Situations Identification
Identification of potential hazards and risks associated with the unit.
Intended Unit Use
Specifies the authorized applications and limitations of the unit.
Installation Guidelines
Guidelines for proper unit placement and initial setup.
Maintenance Recommendations
Recommendations for routine checks to prevent issues and costs.
Modification Warnings
Warning against unauthorized changes affecting warranty and responsibility.
Breakdown and Malfunction Procedures
Immediate actions to take in case of unit failure or malfunction.
User Training Requirements
Key areas the installer must cover during user instruction.
Data Update Information
Information on where to find updated product data.
Original Instructions Note
Note about the original language of the instructions.
Indications for the User
Breakdown and Malfunction Handling
Procedures for handling unit breakdowns and using spare parts.
Installer User Training Topics
Essential topics for installers to train users on unit operation.
Unit Identification Details
Details on the unit's serial number label and its information.
Serial Number Importance
Importance of the unique serial number for ordering parts.
Assistance Request Information
Information needed for requesting technical support.
Before Installation
Unit Reception Procedures
Procedures for checking the unit upon delivery.
Storage Guidelines
Guidelines for storing the unit to prevent damage.
Packaging Removal Instructions
Instructions for safely removing packaging material.
Safe Handling Practices
Safe practices for handling the unit, including PPE.
Selecting the Installation Site
General Site Selection Criteria
General requirements for unit installation site selection.
Functional Space Requirements
Space requirements for unit operation and maintenance.
Unit Positioning Guidelines
Guidelines for optimal unit placement and stability.
Air Flow-Rate on Coils
Ensuring unobstructed airflow for efficient operation.
Safety Valve Gas Side Considerations
Considerations for safety valve gas side installation.
Condensate Water Management
Management of condensate water produced by heat pumps.
Anti-Vibration Mounts Installation
Procedures for installing anti-vibration mounts.
Drain Pan Option
Information on the optional drain pan feature.
Anti-Vibration Mount Kit Options
Details on available anti-vibration mount kits.
Water Connections
Hydraulic System Design
Design considerations for the hydraulic piping system.
Water Quality Requirements
Requirements for water quality and its impact on the unit.
System Cleanliness Procedures
Procedures for cleaning the system before unit connection.
New System Preparation
Steps for preparing and filling new hydraulic systems.
Existing System Connection
Procedures for connecting to existing hydraulic systems.
Risk of Freezing Prevention
Measures to prevent freezing in water connections.
Anti-Freeze Solution Usage
Guidelines for using anti-freeze solutions.
Water Flow-Rate Requirements
Requirements for water flow-rate within operating limits.
Minimum System Water Content
Importance of adequate system water volume for operation.
Water Filter Installation
Installation requirements for water filters to prevent particle entry.
Non-Return Valve Installation
Recommendations for installing non-return valves.
Hydronic Units and Connection Diagrams
Guidance on hydronic unit configurations and diagrams.
Standard Unit Connection Diagram
Connection diagram for a standard unit configuration.
Unit + Pump Connection Diagram
Connection diagram for unit with pump configuration.
Unit + Pump + Water Tank Diagram
Connection diagram for unit with pump and water tank.
Unit + Pump + DHW Valve Diagram
Connection diagram for unit with pump and DHW valve.
Victaulic Fittings Usage
Instructions for using Victaulic fittings for pipe connections.
Water System Operation Sequence
Step-by-step procedure for starting the unit's water system.
Modular Configuration Reference
Reference to specific chapter for modular configuration.
Electrical Connections
Unit Electrical Data
Information on unit electrical specifications and labels.
Electrical Connections Procedures
Procedures and checks for making electrical connections.
Power Supply Network Requirements
Specifications for the unit's power supply.
Signal and Data Line Guidelines
Guidelines for routing and connecting signal and data cables.
Controller Wiring Sections
Information on cable sections for controller wiring.
Customer Electrical Connections Overview
General overview of customer electrical connections.
Wiring for Sizes 10.1-14.1
Specific wiring details for unit sizes 10.1-14.1.
Wiring for Sizes 16.2-22.2
Specific wiring details for unit sizes 16.2-22.2.
Wiring for Sizes 30.2-40.2
Specific wiring details for unit sizes 30.2-40.2.
Remote Control Options
How to control the unit remotely via ON/OFF and Heat/Cool inputs.
Advanced Remote Control Options
Remote control options using advanced function boards.
REMAUX Customer Connections
Wiring details for customer connections using REMAUX.
TW Probe Installation
Installation and connection of the TW water flow probe.
Taf1 Probe Installation
Installation and connection of the Taf1 antifreeze probe.
T5 Probe Installation
Installation and connection of the T5 temperature probe.
Backup Heater HEAT1 Control
Control configuration for backup heater HEAT1.
Backup Heater HEAT2 Control
Control configuration for backup heater HEAT2.
Alarm Signal Connection
Connecting an alarm signal output.
Compressor Running Signal
Connecting a signal for compressor operation status.
External Pump Control
Control options for external circulation pumps.
Remote Keypad Control Usage
Wiring and installation of the remote keypad.
Modular Configuration Reference
Reference to specific chapter for modular configuration.
APR Board Access
Location and access to the APR electronic board.
Domestic Hot Water Function
Configuration and operation of the domestic hot water function.
Start-up
Initial Power Supply Start-up Sequence
Checklist for initial unit power supply and setup.
Unit ON Power Supply Sequence
Checklist for unit ON power supply and operational checks.
Refrigeration Circuit Checks
Checks and procedures for the unit's refrigeration circuit.
Electric Circuit Verification
Verification of electrical connections and parameters before operation.
Unit Options Configuration
Information on accessing and changing unit options settings.
Start-up Report Data Collection
Data to record during unit start-up for future reference.
PED Directive Compliance
Compliance with PED directive for installation and verification.
Control
Control Panel Overview
Overview of the control panel interface.
Control Panel Buttons Description
Description and function of the control panel buttons.
Lock and Unlock Control Keys
Procedure for locking and unlocking control buttons.
Unit Switch-On/Off Procedure
How to turn the unit on and off using the control panel.
Modular Configuration Controller Reference
How controllers reference the master unit in modular systems.
Display Icons and Meanings
Explanation of icons and their meanings on the unit display.
Setting Date, Time, and Language
Instructions for setting date, time, and language.
Setting Operating Mode and Temperature
How to set operating mode and temperature setpoints.
Double Setpoint Capability
Capability to handle two different setpoints for heating/cooling.
Snow Protection Function
Function to prevent snow build-up by activating fans.
Silent Mode Operation
Lowering sound emission levels by reducing fan and compressor speed.
Domestic Hot Water Configuration
Enabling and configuring domestic hot water production.
Querying Unit Variables
Displaying unit status, temperatures, and alarm history.
Timer Scheduling
Setting daily or weekly operating schedules.
Unit Status Codes
Table of unit codes and their descriptions for operational status.
Alarm Management and Protection Modes
Understanding unit protection modes and alarm codes.
Temperature Sensor Faults
Fault conditions for temperature sensors.
R32 Gas Safety Warnings
Area Safety Checks
Safety checks before working on flammable refrigerant systems.
Work Procedures for Flammable Gases
Controlled procedures to minimize risks with flammable gases.
General Work Area Safety
Ensuring personnel awareness and secure working environments.
Refrigerant Presence Detection
Using detectors to ensure absence of flammable refrigerants.
Fire Extinguisher Requirements
Importance of having appropriate fire-fighting equipment.
Ignition Source Prohibition
Strict prohibition of ignition sources during refrigerant operations.
Ventilated Area Requirements
Requirement for working in well-ventilated or outdoor spaces.
Cooling Equipment Checks
Checks for components and systems containing flammable refrigerants.
Electrical Device Safety Checks
Initial safety checks for electrical components.
Repairing Sealed Components Safely
Procedures for safely repairing sealed components.
Intrinsically Safe Components Operations
Operations on intrinsically safe components in flammable atmospheres.
Wire Integrity and Protection
Ensuring wire integrity and protection against environmental effects.
Leak Detection Methods
Acceptable methods for detecting flammable refrigerant leaks.
Refrigerant Removal and Evacuation
Best practices for refrigerant removal and circuit evacuation.
Refrigerant Charging Operations
Requirements for safely charging refrigerant into the system.
Dismantling Safety Procedures
Procedures for safe refrigerant recovery during dismantling.
Equipment Labelling Requirements
Requirements for labelling equipment containing flammable refrigerants.
Refrigerant Recovery Best Practices
Good practices for safe refrigerant removal and transfer.
Transport, Mark, and Storage Regulations
Regulations for transporting, marking, and storing equipment.
Maintenance
Maintenance Safety Precautions
Safety precautions and PPE required for maintenance tasks.
General Maintenance Guidelines
General guidelines for performing maintenance by qualified personnel.
Inspection Frequency Recommendations
Recommended intervals for performing unit inspections.
Unit Booklet Importance
Importance of maintaining a booklet for recording unit interventions.
Standby Mode Procedures
Procedures for preparing the unit for long periods of inactivity.
Recommended Periodical Checks
Table outlining recommended periodic maintenance checks.
System Drain Procedures
Conditions and procedures for draining the system.
Compressor Crankcase Heater Checks
Checks for the compressor crankcase heater.
Water Side Exchanger Cleaning
Cleaning procedures for the water side heat exchanger.
Water Filter Impurity Check
Check for impurities in the water filter.
Flow Switch Operation Check
Checking the operation and cleaning of the flow switch.
Circulation Pump Checks
Checks for leaks and bearing status of circulation pumps.
Insulation Status Inspection
Inspection and maintenance of unit insulations.
Pressure Relief Valve Replacement
Conditions for replacing the pressure relief valve.
Structure Cleaning and Inspection
Cleaning and inspection of the unit structure and panelling.
Air Side Exchanger Cleaning
Cleaning procedures for the air side heat exchanger.
Electric Fan Checks
Checks for electric fans and their grilles.
Refrigerant Leak Detector Information
Information on refrigerant leak detector options.
Refrigerant Leak Detector Maintenance
Maintenance and calibration of refrigerant leak detectors.
Decommissioning
Unit Disconnection Procedures
Safety warnings and procedures for unit disconnection.
WEEE Information and Disposal
Information on proper disposal of electrical and electronic equipment.
Residual Risks
General Residual Risk Identification
Identification of common residual risks for operators and things.
Handling Operation Risks
Risks associated with improper unit handling operations.
Installation Procedure Risks
Risks related to incorrect installation procedures.
General Hazard Identification
General hazards like smell of burning, smoke, or anomalies.
Electrical Parts Risks
Risks of electric shock, intoxication, or fire from electrical parts.
Moving Parts Hazards
Hazards associated with contact with moving components like fans.
Refrigerant Handling Risks
Risks related to refrigerant expulsion and contact with heat sources.
Hydraulic Parts Risks
Risks from defects in tubing or attachments causing leaks.
Unit in Modular Configuration
Control Logic in Modular Systems
How the master unit controls the system logic and load.
Tw Control Probe Installation
Installation guidelines for the Tw water temperature probe.
Domestic Hot Water Configuration
Configuration requirements for units with DHW provision.
Modular System Electrical Connections
Connecting units via the X-Y-E BUS.
Reversed Return Connection Systems
Diagram illustrating reversed return connection systems.
Input and Output Manifold Specifications
Table specifying water piping sizes for different capacities.
Pump System Configuration
Configuring pump systems using DIP switch S12-2.
Module Addressing Procedures
Identifying and addressing modules within the system.
Unit Addressing Methods
Methods for addressing units using encoder ENC4.
Control Addressing Procedures
Procedures for addressing controls and setting addresses.
Remote ON-OFF Control
Applying remote ON-OFF control to the master unit.
Modular System Start-up
System management and thermoregulation by the master unit.
Modular System Alarms
Outcomes of alarms on slave or master units in the system.
Modbus Communication
RS-485 Communication Specifications
Technical specifications for Modbus communication protocol.
Performance - Excellence
Acoustic Configuration - Compressor Soundproofing (SC)
Sound performance data for SC acoustic configuration.
Radiant Panels Performance
Performance data for radiant panel heating.
Terminal Units Performance
Performance data for terminal units.
Radiators Performance
Performance data for radiator systems.
Acoustic Configuration - Compressor Soundproofing (SC) - Premium
Sound performance for Premium SC configuration.
Radiant Panels Performance - Premium
Performance data for Premium radiant panel heating.
Terminal Units Performance - Premium
Performance data for Premium terminal units.
Super Silenced Acoustic Configuration (EN)
Sound performance for EN Super Silenced configuration.
Radiant Panels Performance - Super Silenced (EN)
Performance data for EN Super Silenced radiant panels.
Terminal Units Performance - Super Silenced (EN)
Performance data for EN Super Silenced terminal units.
Sound Level - Excellence
Acoustic Configuration - Compressor Soundproofing (SC) - Sound Levels
Sound pressure and power levels for SC configuration.
Acoustic Configuration - Super Silenced (EN) - Sound Levels
Sound pressure and power levels for EN Super Silenced config.
Acoustic Configuration - Compressor Soundproofing (SC) - Sound Levels (Page 72)
Sound pressure and power levels for SC configuration.
Acoustic Configuration - Super Silenced (EN) - Sound Levels (Page 72)
Sound pressure and power levels for EN Super Silenced config.
Operating Range - Excellence
Cooling Operating Range
Operating limits for cooling mode based on water and air temperatures.
Heating / DHW Production Operating Range
Operating limits for heating and DHW production.
Cooling Operating Range - Premium
Premium cooling operating limits based on water and air temperatures.
Heating / DHW Production Operating Range - Premium
Premium heating and DHW production operating limits.
Construction - Excellence / Premium
Compressor Specifications
Specifications related to the unit's compressors.
User Side Exchanger Details
Details on the user side heat exchanger.
External Exchanger Specifications
Specifications for the external heat exchanger.
External Section Fans Information
Information on the external section fans and motors.
Water Circuit Specifications
Specifications for the unit's water circuit components.
Power Supply Details
Information on the standard power supply.
Electrical Data
Technical electrical data for unit operation.
Correction Factors - Ethylene Glycol
Factors to adjust performance based on ethylene glycol concentration.
Correction Factors - Propylene Glycol
Factors to adjust performance based on propylene glycol concentration.
Fouling Correction Factors
Factors to correct performance based on heat exchanger fouling.
Exchanger Operating Range
Operating pressure limits for heat exchangers.
Overload and Control Device Calibrations
Calibration settings for safety and control devices.
Need help?
Do you have a question about the WiSAN-YSE1 18.2 and is the answer not in the manual?
Questions and answers