Desa RH10PT Owner's Operation And Installation Manual page 7

INSTALLATION
Continued
3. Insert wall anchor (wings first) into hole. Tap
anchor flush to wall.
4. For thin walls (1/2" or less), insert red key
into wall anchor. Push red key to "pop" open
anchor wings (see Figure 5).
IMPORTANT: Do not hammer key! For thick
walls (over 1/2" thick) or solid walls, do not
pop open wings.
5. Tighten two screws until 1/16" space (thick-
ness of penny) is between screwheads and wall
(see Figure 6).
Figure 4 - Folding Anchor
Figure 5 - Popping Open Anchor Wings
For Thin Walls
1/16"
Space
Figure 6 - Tightening Anchors
110373-01E
Thin Walls
(1/4" to
1/2" thick)
Thin or Thick
Wall (thick
wall shown)
Solid
Wall
www.desatech.com 7