Related Manuals for Iseki TG6557
Summarization of Contents
SAFETY
MACHINE PURPOSE
Defines the intended use and operational scope of the tractor.
PERSONAL SAFETY INSTRUCTIONS
Outlines essential safety warnings and symbol interpretations.
MAKING YOUR TRACTOR A SAFE VEHICLE
Provides guidelines for safe tractor operation and modifications.
How to be a Safe Operator
Details operator qualifications, health, and protective gear requirements.
Before Operation
Lists essential pre-operation checks and safety measures.
Starting Engine and Operating Tractor
Covers procedures for starting the engine and initial operation.
When Traveling
Addresses safe traveling practices on various terrains and conditions.
Loading onto or Unloading from a Truck
Provides instructions for safely loading and unloading the tractor.
During Operation
Details safety precautions to be observed during tractor operation.
Inspection and Maintenance
Covers safety aspects related to inspection and maintenance procedures.
MAINTENANCE OF THE ELECTRIC SYSTEM
To Maintain Electric Wiring
Guidelines for maintaining the tractor's electrical wiring system.
To Handle the Battery
Instructions for safe handling and maintenance of the battery.
To Handle Booster Cables
Provides instructions for safely using booster cables.
SAFETY DECALS
Fan & belt warning label
Warns about entanglement risks with the fan and belt.
Battery disconnecting label
Advises on safe battery disconnection procedures.
Hot part warning label
Warns about hot surfaces and burn risks.
Ether label
Warns about explosion risks associated with ether.
PTO and Trailer label
Addresses risks of overturn and entanglement with PTO/trailers.
Radiator label
Warns about high pressure steam and hot water from the radiator.
Battery label
Covers explosion, eye protection, and reading manual for battery safety.
Starter warning label
Warns about electric shock risk when starting the engine.
Operation caution label (Cabin type)
Covers operation safety, maintenance, abrupt moving, injury, and overturning risks.
Fuel label
Warns about explosion and burn risks when handling fuel.
ROPS label (ROPS type)
Emphasizes ROPS upright position and seat belt use.
Seat belt label (Cabin type)
Stresses the importance of fastening the seat belt.
TRACTOR IDENTIFICATION
STATUTORY PLATE
Details information found on the tractor's statutory plate.
MODEL TYPE DESIGNATION
Explains the system used for tractor model type designation.
MAJOR COMPONENTS
Rear ROPS Type
Identifies major components for tractors with Rear ROPS.
Center ROPS Type
Identifies major components for tractors with Center ROPS.
CABIN Type
Identifies major components for tractors with a CABIN.
OPERATION
GENERAL LAYOUT (Standard Type)
Shows the general layout and location of controls for standard tractor type.
GENERAL LAYOUT (HST(H) Type)
Shows the general layout and location of controls for HST tractor type.
GENERAL LAYOUT (Dual Clutch(G) Type)
Shows the general layout and location of controls for Dual Clutch tractor type.
INSTRUMENT PANEL
Main Switch
Explains the function and positions of the main power switch.
Indicator Light Array
Details the various indicator lamps and their meanings.
Fault Code Indication
Explains how fault codes are displayed on the instrument panel.
Horn Switch & Lamp Switches
Describes the operation of horn and various lamp switches.
BRAKES
Brake Pedals
Explains the function of left and right brake pedals and their latching.
STARTING
Pre-Start Inspection
Lists essential checks before daily tractor operation.
Normal Starting (Standard Type)
Step-by-step guide to starting the engine on standard models.
Normal Starting (HST Type)
Step-by-step guide to starting the engine on HST models.
Normal Starting (Dual Clutch Type)
Step-by-step guide to starting the engine on Dual Clutch models.
Cold Weather Starting
Guidelines for starting the tractor in cold weather conditions.
Warm Up Period
Explains the importance and duration of engine warm-up.
Starting Circuit For The Engine
Details the safety system for engine starting and its checks.
TRAVELING SPEED SELECTION (STANDARD TYPE)
Engine Speed Control (Standard Type)
Explains how to control engine speed on standard models.
Forward / Reverse Lever (Standard Type)
Describes the forward/reverse lever operation for standard models.
Shift Levers (Standard Type)
Explains the main and range shift levers on standard models.
Changing the Traveling Speed (Standard Type)
Details how to change traveling speed on standard models.
TRAVELING SPEED SELECTION (HST TYPE)
Engine Speed Control (HST Type)
Explains engine speed control for HST models.
Forward / Reverse Lever (HST Type)
Describes forward/reverse lever operation for HST models.
Shift Lever (HST Type)
Explains the shift lever for HST models.
HST Pedal (HST Type)
Details the operation of the HST pedal.
Cruise Control (HST Type)
Covers the operation and release of cruise control on HST models.
Speed Adjustment (HST Type)
Explains how to adjust maximum speed and response on HST models.
HST Stage Selection (HST Type)
Describes how to select between low and high speed stages on HST models.
TRAVELING SPEED SELECTION (DUAL CLUTCH TYPE)
Engine Speed Control (Dual Clutch Type)
Explains engine speed control for Dual Clutch models.
Forward / Reverse Lever (Dual Clutch Type)
Describes forward/reverse lever operation for Dual Clutch models.
Shift Levers (Dual Clutch Type)
Explains the shift levers for Dual Clutch models.
Changing the Traveling Speed (Dual Clutch Type)
Details how to change traveling speed on Dual Clutch models.
POWER TAKE-OFF (PTO)
Rear PTO Shaft
Provides specifications and safety information for the rear PTO shaft.
Mid-PTO Shaft
Provides specifications and safety information for the Mid-PTO shaft.
PTO Switch & PTO Selectable Switch
Explains the operation of PTO engagement switches.
Rear PTO Selector Lever
Details how to select PTO speeds using the rear selector lever.
Mid PTO Selector Lever
Explains the operation of the Mid PTO selector lever.
Stationary PTO Switch
Describes the function and operation of the stationary PTO switch.
3-POINT LINKAGE
Position Control (Standard & HST Type)
Explains position control for standard and HST linkage.
Draft Control Lever (Standard type)
Details the draft control lever for standard models.
Position Control (Dual Clutch Type)
Explains position control for Dual Clutch linkage.
Draft Control Dial
Details the draft control dial for precise implement depth.
Up-Stop Switch
Describes the up-stop system for PTO safety when raising implements.
Reverse-Up Switch
Explains the reverse-up system to prevent implement damage.
Attaching Implements
Provides a step-by-step guide for attaching implements to the tractor.
Using 3-Point Linkage Position Control
Explains how to use the position control lever for various tasks.
Using Draft Control (Standard & Dual Clutch Type)
Details how to use draft control for ground-engaging implements.
JOYSTICK
Joystick Lever
Explains the operation of the joystick lever for loader control.
Joystick Lock Lever
Describes the function of the joystick lock lever.
Joystick Operation
Details the joystick control functions and output ports.
EXTERNAL AUXILIARY HYDRAULICS
External Auxiliary Hydraulics Lever
Explains the levers for controlling external hydraulic implements.
Hydraulic Valves
Describes the location and function of hydraulic valves and couplers.
ROLL OVER PROTECTIVE STRUCTURE (ROPS)
Rear ROPS Type
Details the operation and safety of Rear ROPS type tractors.
Center ROPS Type
Details the operation and safety of Center ROPS type tractors.
COMFORT ADJUSTMENTS
Steering Column Tilt
Explains how to adjust the steering column for operator comfort.
SEAT & SUSPENSION ADJUSTMENT
COBO GT62 / M200
Details seat adjustment for COBO GT62/M200 models.
GRAMMER MSG83 / 521
Details seat adjustment for GRAMMER MSG83/521 models.
GRAMMER MSG93 / 521
Details seat adjustment for GRAMMER MSG93/521 models.
INSTRUMENTS & CONTROLS & OPERATION - CABIN TYPE -
GENERAL LAYOUT
Shows the general layout and location of controls within the cabin.
OPENING / CLOSING DOORS
Provides instructions for opening, closing, and locking cabin doors.
REAR WINDOW
Details the operation of the cabin's rear window.
CORNER WINDOWS
Explains how to open and close the cabin's corner windows.
ROOM LAMP
Describes the location and operation of the cabin's room lamp.
WORK LAMPS
Explains how to operate and adjust the tractor's work lamps.
WIPER AND WASHER SWITCH
Details the operation of the wiper and washer systems.
AIR CONDITIONER OPERATION
Covers the operation of the air conditioner system.
Air Vents
Shows the location and adjustment of air vents.
Using the Cooling System
How to operate the air conditioner for cooling.
Using the Heating System
How to operate the air conditioner for heating.
Using the Defrosting System
How to use the system to defrost windows.
Using the Rear Defogger system
Explains how to use the rear defogger system.
LUBRICATION & PERIODIC MAINTENANCE
SPECIFICATIONS & CAPACITIES
Provides technical specifications and fluid capacities for tractor systems.
PERIODIC INSPECTION AND MAINTENANCE TABLE
Details the recommended schedule for tractor inspections and maintenance.
SERVICE ACCESS
Guides on accessing engine components via hood and side covers.
LUBRICATION DETAILS
Provides specific lubrication instructions for various tractor components.
Front Axle Oil
Details the procedure for checking and changing front axle oil.
COOLING SYSTEM
Covers procedures for checking, replenishing, and flushing the cooling system.
ENGINE AIR CLEANER
Instructions for cleaning and servicing the engine air cleaner.
FUEL SYSTEM
Provides information on fuel system maintenance and fuel filter service.
Throttle Lever
Explains the function and adjustment of the throttle lever.
CRANKCASE BREATHER
Instructions for servicing the crankcase breather element.
AIR CONDITIONER FILTER
Details the inspection and cleaning of the air conditioner filter.
ELECTRICAL SYSTEM
Battery
Covers battery location, safety, handling, and charging.
Safety Switches
Explains the neutral-start system and safety switch functions.
Wiring / Fuse Arrangement
Provides precautions for wiring and fuse arrangement.
Fuse Location
Details the location and function of various fuse boxes.
WHEELS & TIRES
Tire Inflation Pressures
Details correct tire inflation pressures for various models.
Wheel Bolt Torque
Lists correct torque specifications for wheel bolts.
Front Wheel Alignment
Explains how to check and adjust front wheel alignment.
Front Wheel Spacing
Describes front wheel spacing settings for different tires.
Rear Wheel Spacing
Explains how to adjust rear wheel spacing.
TROUBLESHOOTING
ENGINE
Lists common engine problems, possible causes, and remedies.
CLUTCH
Lists common clutch problems, possible causes, and remedies.
BRAKES
Lists common brake problems, possible causes, and remedies.
STEERING SYSTEM
Lists common steering problems, possible causes, and remedies.
HYDRAULIC SYSTEM
Lists common hydraulic system problems, causes, and remedies.
ELECTRICAL SYSTEM
Lists common electrical system problems, causes, and remedies.
HST SYSTEM (HST TYPE)
Lists common HST system problems, causes, and remedies.
SPECIFICATIONS
ENGINE
Provides detailed specifications for the tractor engines.
CABIN
Lists specifications related to the tractor's cabin.
TRANSMISSION
Details the specifications for different transmission types.
POWER TAKE OFF (PTO)
Lists specifications for the Power Take-Off (PTO) system.
HYDRAULIC SYSTEM
Provides specifications for the hydraulic system.
ELECTRICAL SYSTEM
Lists specifications for the tractor's electrical system.
CAPACITIES
Lists fluid capacities for various tractor systems.
TREAD WIDTH SETTING
Details tread width settings for front and rear wheels.
GENERAL DIMENSIONS
Provides dimensional data for the tractor.
AXLE LOADS & TIRE LOAD CARRYING CAPACITY
Details axle loads and tire load capacities.
NOISE DECLARATION
Provides information on driver perceived sound levels.
VIBRATION DECLARATION (Regulation(EU)No 1322/2014)
Provides vibration declaration data for operator comfort.
FRONT WEIGHT
Guidance on attaching front weights for balance.
ATTACHMENT (OPTION)
Lists available optional attachments and their parts codes.
Need help?
Do you have a question about the TG6557 and is the answer not in the manual?
Questions and answers