Page 1
Opticom Technologies Inc. Temperature Testing of Model CC-02-4.3 CCTV Camera Prepared by: Weir-Jones Engineering Consultants Ltd. 2040 West 10th Avenue Vancouver, B.C. V6J 2B3 Tel: 604 732-8821 Fax: 604 732-4801 E-mail: wjgroup@weir-jones.com Web: www.weir-jones.com ISO 9001:2000 Registered June 17 , 2005...
Page 2
AUTHORIZATION The work described in this report was authorized by David Boyd of Opticom Technologies Inc. on June10 , 2005. The report was prepared by Paul Chong, P.Eng. Paul Chong, P.Eng. Project Engineer Dated at Vancouver, June 14 , 2005.
On June 10 , 2005 Weir-Jones Engineering Consultants Ltd. (WJEC) was retained by Opticom Technologies Inc. to perform a set of temperature tests on three of its Model CC-02-4.3 CCTV cameras. The primary objective in testing the cameras was to verify their functionality at low temperatures.
Equipment Placement The placement of the three Opticom CCTV cameras within the environmental chamber is shown in Figure 2. An external video monitor is placed outside the chamber in order to view the output from the cameras.
The functionality of the three CCTV cameras was verified and witness by David Boyd of Opticom Technologies Inc. at the end of each temperature step by powering up the cameras and viewing the video output on the external monitor. In both temperature extremes, each camera powered up and provided video output to the external monitor.