Teac SR-LUXi Owner's Manual page 23

Press the VOLUME button (+ or −) to set the
4
source, and then press the ALARM button.
Each time the VOLUME button (+ or −) is pressed, the
setting is changed as follows:
The ALARM button lights .
< AUX cannot be selected as a source .
T h e b u z ze r s o un d is l o u d, s o d o n ot us e
headphones when buzzer is selected as the
source and the wake up timer is on .
Use the WAKE UP switch on the back of the unit
5
to set the light function.
OFF: The light does not turn on automatically .
10:
T h e l i g h t g r a d u a l l y b r i g h t e n s s t a r t i n g
10 minutes before the set time .
30:
T h e l i g h t g r a d u a l l y b r i g h t e n s s t a r t i n g
30 minutes before the set time .
Prepare the source.
6
If the source is set to iPod, insert an iPod/iPhone .
If the source is set to FM, tune in a station .
The wake up timer is now set .
< If the source is set to iPod, but no iPod/iPhone is
set, the buzzer will sound .
< Playback volume will gradually increase when the
unit is turned on by the wake up timer .
(buzzer)
Back
If you put the unit power in
standby (off ) after setting the
wake up timer, the AL ARM
button light also turns off, but
the wake up timer is still on .
See the instructions on the next
page to turn the wake up timer
off .
23