Related Manuals for Shure ULXD2/B58
Summarization of Contents
ULX-D Wireless Microphone System
Quickstart Instructions
Provides a step-by-step guide for initial setup and basic operation of the wireless system.
General Description and Features
Key Features
Highlights the main functionalities and benefits, such as audio quality, RF performance, and encryption.
Hardware Overview
Receiver Controls and Ports
Identifies and explains the controls, indicators, and ports on the receiver unit.
Transmitter Components and Operation
Describes transmitter parts, controls, and operational elements.
Specialized Transmitter Types
Boundary and Gooseneck Base Transmitters
Details the controls and indicators specific to base station transmitters.
Advanced Transmitter Features
RF Mute and Mic Offset Settings
How to mute RF signals and adjust microphone input gain offsets.
System Display and Menu Navigation
Receiver Channel Information Display
Explains the data displayed for each receiver channel, including status and settings.
System Configuration and Locking
Locking Controls and Settings
Prevents accidental or unauthorized changes to receiver and transmitter settings.
Battery Management
Battery Status and Runtime Monitoring
Understanding the 5-segment battery icon and approximate battery life.
Audio, Encryption, and Sync
Setting Receiver Gain
Adjusting the audio signal level for optimal performance and to prevent clipping.
Audio Signal Encryption Setup
Setting up secure, encrypted audio paths between transmitters and receivers.
Scan and Sync Process
Step-by-step guide to scan for frequencies and sync with transmitters.
System Deployment and Frequency Management
Multiple System Setup Guide
Guides for setting up networked and non-networked receiver channels.
Transmitter IR Presets
Quickly configure transmitter settings from the receiver via IR sync.
RF Performance and Network Configuration
Transmitter RF Power and Interference Management
Managing RF output power and responding to interference detection.
Networking Receivers and High Density Mode
Connecting receivers to a network and optimizing for high-density channel use.
System Maintenance, Management, and Troubleshooting
Firmware Updates and System Reset
Procedures for updating device firmware and restoring factory defaults.
Managing System with Shure Software
Using Wireless Workbench and ShurePlus Channels for system control.
Troubleshooting Common Issues
Diagnosing and resolving problems like no sound, distortion, or encryption errors.
Interference, Range, and Accessories
Reducing Interference and Increasing Range
Techniques to minimize RF interference and extend transmission range.
System Specifications
RF Carrier Frequency Range and Working Range
Specifies the operational frequency bands and typical transmission distances.
ULXD1 Transmitter Specifications
Detailed technical specifications for the ULXD1 bodypack transmitter.
ULXD2 Transmitter Specifications
Detailed technical specifications for the ULXD2 handheld transmitter.
Diagrams and Connector Schematics
TA4M Connector Diagram
Wiring schematic for the TA4M connector used in transmitters.
Battery Life and Frequency Data Charts
ULXD Battery Life Chart
Provides typical battery runtime for different modes and battery types.
Important Safety Instructions
General Safety Precautions
Covers water, ventilation, heat sources, plug safety, and cord protection.
Product Compliance and Information
Licensing and Regulatory Compliance
Information on licensing requirements, warnings, and certifications for various regions.
User Information and Warnings
FCC Compliance Statement
Details on FCC rules, interference guidelines, and user operation limitations.
Country-Specific Warnings
Canada Wireless Warning
Specific regulatory compliance and operating conditions for Canada.
Need help?
Do you have a question about the ULXD2/B58 and is the answer not in the manual?
Questions and answers