Related Manuals for Storm Shell SS-65
Summary of Contents for Storm Shell SS-65
- Page 1 ASSEMBLY & INSTALLATION INSTRUCTIONS SS-55/65/75 Pole Mount v 3.0 (Storm Shell Hard Cover and pole not Included) If you have any questions, please contact us at cs@stormshelltv.com, or call at (435) 752-6611 Mon – Fri 9am – 5pm (MT)
- Page 3 STOP Please do not return to store. WE CAN HELP Email: cs@stormshelltv.com Call: (435) 752-6611 M–F 9am – 5pm (MT) For Customer Service • If you need any assistance with your new item, please call us or you can email us your inquiries. We will be happy to assist and walk you through your assembly process.
-
Page 4: Weight Capacity
The 55/65/75 Storm Shell Pole Mount is designed to be used with the 55, 65 or 75 Storm Shell TV Hard Cover. This instruction manual is a supplement to the Assembly and Installation Instructions for Storm Shell TV Hard Cover. - Page 5 Installation Tools (Not Included) All Installations Phillips Tape Measure Pen/Pencil Screwdriver Power Drill Socket Wrench Bubble Level 1/4” (7mm) Drill Bit...
-
Page 6: Safety Caution
Safety Caution • Prior to installation of this product, the installation instructions should be read and completely understood to prevent personal injury and property damage. Keep these installation instructions in an easily accessible location for future reference. • This mount and the hard cover contains small parts which can act as a choking hazard if swallowed. - Page 7 Supplied Parts & Hardware 55/65/75 Pole Mount Pole Mount (1 PC) Assembly Hardware 2.0” U-Bolt 4.0” U-Bolt 1.5” U-Bolt 3.0” U-Bolt (2 PC) (2 PC) (2 PC) (2 PC) M6 Flange Nut M8 Thin Nut M6x16mm M8 Washer M8x30mm (4 PC) (8 PC) (4 PC) (8 PC)
- Page 8 Assembly & Installation Video Scan the QR Code for video link Step 1 – Prepare the Storm Shell 1-1 Prepare the Storm Shell • Follow Step 1 in your Storm Shell owner’s manual to assemble your Storm Shell Back and Storm Shell Front.
- Page 9 Step 2 – Attach Storm Shell Back to a Pole using the 55/65/75 Pole Mount Two people required for installation CAUTION! 2-1 Mount Storm Shell Back • Place the Storm Shell Back on a protective cover over the ground or other smooth surface with the back facing upwards.
- Page 10 2-2 Mount Storm Shell Back • Mark the Storm Shell Back in the 4 indicated hole locations. 2-3 Mount Storm Shell Back • Remove the Storm Shell Pole Mount and drill the 4 marked locations with a 1/4” (7mm) drill bit.
- Page 11 2-4 Mount Storm Shell Back • Select the smallest U-bolts that fit the pole and attach the Pole Mount at the desired location. 2-5 Mount Storm Shell Back...
- Page 12 2-6 Separate Vertical Brackets from TV Bracket • TV bracket from the Storm Shell Cover. 2-7 Note the TV Bracket Orientation TV Bracket – This way up Note the hole pattern location • Rotate the TV bracket joints, if needed, to match this orientation.
- Page 13 2-8 Mount TV Bracket • Attach the TV Bracket. 2-9 Mount Storm Shell Back • Install the L11 and L12 hole plugs in the Storm Shell Back in the unused wall mount holes.
- Page 14 Step 3 – Complete your Storm Shell Assembly 3-1 Complete your Storm Shell Assembly • Follow all steps after Step 2 in your Storm Shell owner’s manual.
Need help?
Do you have a question about the SS-65 and is the answer not in the manual?
Questions and answers