Related Manuals for OBO Bettermann T 60
Summarization of Contents
Installation in External Areas, Outdoors, in Damp and Wet Areas and Rooms
Basic Principles for External Installations
General requirements for installation, including erection requirements according to DIN VDE 0100-ff.
UV Radiation Protection for Junction Boxes
Discusses structural damage from UV and highlights OBO Bettermann series with high UV resistance.
High Temperature Protection in Outdoor Areas
Addresses device requirements for ambient temperatures and potential issues with heat sources.
Chemical Influence Resistance
Covers suitability restrictions in polluted areas, noting X series resistance to oils and fats.
Condensation Prevention and Management
Explains condensation in housings and its negative impacts, suggesting solutions like drainage openings.
Protection Against Precipitation
Discusses protection rating tests, limitations, and the need for condensation water openings.
Water Build-up and Frost Protection
Addresses water freezing in recesses causing mechanical load and housing damage, requiring protection.
Protection Against Plants and Mould Growth
Considers damage from organic materials, requiring specific routing or protective measures.
Overview of the Installation Areas
Direct Contact Protection (Basic Protection)
Details protection requirements for active parts according to DIN VDE 0100-410, including IP ratings.
Bathroom Installation Zones (DIN VDE 0100-701)
Defines bathroom areas and permitted devices with specific IP protection requirements.
Pool Installation Zones (DIN VDE 0100-702)
Outlines areas around pools and electrical resource protection ratings for different zones.
Agricultural & Horticultural Facilities (DIN VDE 0100-705)
Specifies requirements for switch-off devices, materials, and chemical resistance in agricultural settings.
Damp & Wet Areas & Outdoor Installations (DIN VDE 0100-737)
Details protection against water droplets and spray water for damp, wet, and outdoor environments.
Photovoltaic Systems (DIN VDE 0100-712)
Addresses external influences, heat dissipation, and warning requirements for PV system junction boxes.
Strain Relief and Cable Systems (VDE 0100-520)
Defines requirements for cable system selection and erection to avoid damage, specifying tensile strength.
Junction Boxes from OBO Bettermann
OBO Bettermann A Series Junction Boxes
Introduces the A series, made of halogen-free thermoplastic, offering a simple solution for basic applications.
OBO Bettermann T Series Junction Boxes
Highlights the T series, made from high-quality materials, for stability and versatility in various conditions.
OBO Bettermann X Series Junction Boxes
Focuses on the X series, known for high quality, robustness, impact resistance, and UV resistance.
OBO Bettermann Mx Series Junction Boxes
Describes the Mx series aluminium housings, designed for toughest conditions and optimum protection.
Need help?
Do you have a question about the T 60 and is the answer not in the manual?
Questions and answers