Related Manuals for Hunter Avia II 59593
Summarization of Contents
Safety and Compliance Information
General Safety Warnings and Cautions
Essential safety instructions and warnings for installation and operation to prevent injury or damage.
Regulatory Compliance
Information on FCC rules, UL, and CSA certifications for the fan.
Installation Preparation
Required Tools List
Lists the necessary tools for successfully installing the ceiling fan.
Box Contents and Identification
Component Overview
Details and diagrams of all parts included in the fan's packaging.
Hardware Identification Guide
Illustrations of hardware, often drawn to scale, for easy identification during installation.
Choosing the Right Installation Location
Room and Outlet Box Requirements
Specifies minimum clearance, outlet box compatibility, and mounting structure needs.
Ceiling Angle Considerations
Guidance on standard, angled, and vaulted ceiling mounting, including angled mounting kits.
Ceiling Bracket and Downrod Installation
Ceiling Bracket Mounting Options
Describes two methods for securing the ceiling bracket using machine or wood screws.
Downrod Attachment and Securing
Steps for connecting the downrod to the motor and securely tightening the setscrew.
Hanging the Fan Assembly
Mounting Fan to Ceiling Bracket
Guide on how to properly place the downrod ball into the ceiling bracket slot.
Canopy Positioning
Instructions for sliding the canopy over the downrod and wires before securing.
Wiring the Fan Components
Connecting Receiver to Fan Wires
Details on connecting fan wires (black, yellow, white, blue) to the remote receiver.
Grounding Wire Connections
Guidance on connecting all grounding wires from ceiling, downrod, and bracket.
Canopy and Blade Assembly
Installing the Canopy
Steps for fitting and securing the canopy to the ceiling bracket using canopy screws.
Attaching Fan Blades to Motor
Instructions for attaching each blade to its iron using washers and blade screws.
Light Kit and Glass Installation
Assembling the Light Kit Fixture
Steps for feeding wires through the trim ring and connecting light kit plugs to the motor.
Installing the Glass Shade
Guidance on installing bulbs and then securing the glass shade to the light kit.
Remote Control Setup and Use
Remote Battery and Pairing
Instructions for installing batteries in the remote and pairing it with the receiver.
Enabling Dimming Mode
Explanation on how to enable or disable the light dimming feature.
Remote Control Cradle Mounting
Adhesive Strip Installation
Method for attaching the cradle to a wall using an adhesive strip.
Screw Mounting Method
Method for attaching the cradle to a wall using screws and optional drywall anchors.
Fan Control Features
Using the Reverse Switch
Explains how to use the reverse switch to change fan rotation direction for updraft or downdraft.
Understanding Airflow Directions
Describes the effects of updraft (clockwise) and downdraft (counterclockwise) airflow.
Troubleshooting Fan Issues
Fan and Remote Malfunctions
Solutions for problems like fan not starting, erratic remote control, or remote range issues.
Addressing Wobbling and Noise
Guidance for resolving excessive wobbling and noisy operation, including blade checks.
Remote Pairing and Interference Solutions
Steps to resolve remote pairing issues and interference from multiple fans.
Limited Warranty Information
Warranty Coverage Terms
Outlines the terms of the limited lifetime motor warranty and one-year limited warranty for other parts.
Warranty Exclusions and Limitations
Details what is not covered by the warranty, including labor and specific damage causes.
Downrod Replacement Procedure
Steps for Changing Downrod
Step-by-step instructions for removing the standard downrod and installing a different length.
Downrod Installation Safety
Important safety warning to prevent fan fall hazards during downrod assembly.
Need help?
Do you have a question about the Avia II 59593 and is the answer not in the manual?
Questions and answers