Table Of Contents - NAPCO XP-400 Using Instruction

Introduction

Table of Contents

Keypad Controls and Indicators ................................
Arming your System (When Leaving) .......................
Bypassing Zones .....................................................
Protecting Yourself While Home ...............................
Emergency Keys .......................................................
Disarming the System ...............................................
Silencing an Alarm.....................................................
Special Functions .....................................................
Programming User Codes .........................................
System Troubles .......................................................
Glossary ...................................................................
1
Bell / Battery Test
Test your bell or siren by pressing
This will cause the bell, or siren to sound for 2 seconds and
also initiate a test of the battery .
2
Central Station Communication Test
(This test should only be performed on weekends or at a
time designated by your alarm company)
1. Notify Central Station of the impending test.
4
Oi220a
page 4
5
6 Central Station Phone Number: ____________________
6
7 Central Station Account Number: ____________________
8
For Service Call: ____________________
9
9
10 Entry Delay:
11
12 Exit Delay: ____________________
15
Alarm Time-out: ____________________
Important - Test Your System Weekly !

2. Secure all zones to light Ready Light on your keypad.
followed by .
3. Enter your user code to Arm the system.
4. Violate your alarm by opening a window / door etc.
5. The siren or bell should sound and the system will send
6 . Enter your user code to silence the bell or sounder.
7. Call Central Station to insure that the alarm signals were
System Information
____________________
the alarm signals to the Central Station
received properly.
Tuesday, September 16, 1997 08:30