Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for UWT Mononivo Series
Summarization of Contents
Technical Data: VN 4020
VN 4020 Specifications
Details dimensions, thread types, materials, and operating parameters for VN 4020.
Technical Data: VN 4030
VN 4030 Specifications
Details dimensions, thread types, materials, and operating parameters for VN 4030.
Technical Data: MN 4020
MN 4020 Specifications
Details dimensions, thread types, materials, and operating parameters for MN 4020.
Technical Data: MN 4030
MN 4030 Specifications
Details dimensions, thread types, materials, and operating parameters for MN 4030.
Operating Temperature Characteristics
Mode 1 Temperature Chart
Ambient vs. process temperature limits for Mode 1 operation.
Mode 2 Temperature Chart
Ambient vs. process temperature limits for Mode 2 operation.
Sensitivity and Material Properties
VN 4000 Sensitivity Levels
Defines sensitivity (density) for VN 4000 and terminal connections.
MN 4000 Sensitivity Levels
Defines sensitivity (density) for MN 4000 and terminal connections.
Bulk Material Particle Size
Specifies particle size limits for VN 4000 and MN 4000 applications.
Application: VN 4020 & MN 4020
Mechanical Load for VN/MN 4020
Details mechanical load limits for VN 4020 (<600N) and MN 4020 (<400N).
Protective Angle for VN 4020
Guidance on using a protective canopy for VN 4020 under high mechanical load.
Application: VN 4030 & MN 4030
Load and Length Limits for VN/MN 4030
Specifies load limits and max probe lengths based on angle for VN/MN 4030.
Sliding Sleeve Tightening Torque
Instruction to tighten straining screws on the sliding sleeve with 20Nm.
Assembly Methods
Fixing via Threads
Instructions for mounting using threads, including torque and sealing materials.
Fixing via Flanges
Details on mounting using flanges, including gasket use.
Alignment and Ingress Protection
Correct Alignment Practices
Illustrates proper alignment to maintain IP 66 ingress protection.
Incorrect Alignment Practices
Shows incorrect alignment that compromises ingress protection.
Probe Handling and Treatment
VN 4000 Improper Handling
Illustrates incorrect handling procedures for VN 4000 probe.
MN 4000 Improper Handling
Illustrates incorrect handling procedures for MN 4000 probe.
Spare Parts Availability
VN 4000 Spare Parts
Lists available spare parts for VN 4000, including voltage and output types.
MN 4000 Spare Parts
Lists available spare parts for MN 4000, including voltage and output types.
Electrical Connection: Relay DPDT
DPDT Wiring Diagram
Shows wiring terminals and connections for Relay DPDT module.
DPDT Power Supply Specs
Details power supply voltage, frequency, and consumption for VN/MN 4000.
DPDT Isolating Voltage
Specifies the isolating voltage levels for the device.
Electrical Connection: PNP
PNP Wiring Diagram
Illustrates wiring terminals and connections for PNP output module.
PNP Power Supply Specs
Specifies power supply voltage and current for PNP output.
Switching Logic Configurations
VN 4000 Logic Options (FSL/FSH)
Describes switching logic for VN 4000 with FSL and FSH configurations.
MN 4000 Logic Options (FSL/FSH)
Describes switching logic for MN 4000 with FSL and FSH configurations.
Logic Diagrams for Outputs
Shows logic diagrams for Relay DPDT and PNP outputs based on material level.
Maintenance and Cleaning
Cleaning Procedure for Probes
Instructions for cleaning VN 4000 and MN 4000 probes using a brush.
ATEX II 1/2D + IEC-Ex t IIIC Approvals
Permitted Relative Pressure
Specifies the permitted relative pressure range for ATEX/IEC-Ex certified devices.
Zone Borders and EPLs
Details zone classifications and EPLs for VN/MN 4020 and VN/MN 4030.
Installation Guidelines
Cable Pull Relief Requirement
Highlights the need for a pull relief for the cable connection.
Equipotential Bonding Connection
Instructions to connect the device with equipotential bonding of the plant.
ATEX / IEC-Ex: Further Remarks
Installation and Wiring Compliance
Emphasizes adherence to local regulations for installation and field wiring.
Cable Gland Installation Procedures
Guidance on installing cable glands according to country regulations and using blanking elements.
Approved Parts and Temperature Limits
Requirements for using approved parts and ensuring temperature range compatibility.
Need help?
Do you have a question about the Mononivo Series and is the answer not in the manual?
Questions and answers