UWT vibranivo VN 1020 Instruction Manual
  1. Manuals
  2. Brands
  3. UWT Manuals
  4. Accessories
  5. vibranivo VN 1020
  6. Instruction manual

UWT vibranivo VN 1020 Instruction Manual

Hide thumbs Also See for vibranivo VN 1020:
Table of Contents

Advertisement

Quick Links

Vibranivo
Series
VN 1000
VN 2000
VN 5000
VN 6000
Instruction manual
010516
®
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the vibranivo VN 1020 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for UWT vibranivo VN 1020

Summary of Contents for UWT vibranivo VN 1020

  • Page 1 Vibranivo ® Series VN 1000 VN 2000 VN 5000 VN 6000 Instruction manual 010516...
  • Page 2 UWT GmbH Westendstraße 5 Tel.: +49 (0)831 57123-0 Internet:www.uwt.de D-87488 Betzigau Fax: +49 (0)831 76879 E-Mail: info@uwt.de Scope of this Types VN 1020 1030 1050 instruction VN 2020 2030 2050 manual: VN 5020 5030 5050 VN 6020 6030 6050 Approval...

  • Page 3: Table Of Contents

    Table of Contents Safety /warning notes Page Fields of application Page Technical Data Page Application Page Installation Page Spare parts Page Electrical connection Page Switching logic Page Maintenance Page Assembly VN *020 separate housing Page ATEX / IEC-Ex Notes Page...

  • Page 4: Safety /Warning Notes

    Safety /warning notes Installation, maintenance and commissioning may be accomplished only by qualified technical personnel. For terminal connection of the device, the local regulations or VDE 0100 (Regulations of German electrotechnical Engineers) must be observed. All field wirings must have insulation suitable for at least 250V AC. The temperature rating must be at least 90°C (194°F).

  • Page 5: Technical Data

    Technical Data °C VN 1020 VN 2020 R 1 1/2“ NPT 1 1/2“ 1.4301 (304) 1.4541 (321) 1.4404 (316L) 1.4404 1.4581 (316L) A, B °C -1 .. +16bar -1 .. +16bar (-14.5 .. +232psi) (-14.5 .. +232psi) ~ 1,6kg (3.5 lbs) ~ 2,3kg (5 lbs)
  • Page 6 °C VN 1030 VN 2030 R 1 1/2“ NPT 1 1/2“ 1.4301 (304) 1.4541 (321) 1.4404 (316L) 1.4404 1.4581 (316L) B, L °C -1 .. +16bar -1 .. +16bar (-14.5 .. +232psi) (-14.5 .. +232psi) ~ 1,6kg (3.5 lbs) ~ 2,3kg (5 lbs) +2,5kg/m +2,5kg/m (+5.5 lbs per 39.9“) (L)
  • Page 7 °C VN 1050 VN 2050 R 1 1/2“ NPT 1 1/2“ 1.4301 (304) 1.4541 (321) 1.4404 (316L) 1.4404 1.4581 (316L) B, L °C -1 .. +6bar (-14.5 .. +87psi) ~ 4,0 kg (8.8 lbs) + 0,5 kg/m (+1.1 lbs per 39.9“) (L)
  • Page 8 °C VN 5020 VN 6020 R 1 1/2“ NPT 1 1/2“ 1.4301 (304) 1.4541 (321) 1.4404 (316L) 1.4404 1.4581 (316L) A, B °C -1 .. +16bar -1 .. +16bar (-14.5 .. +232psi) (-14.5 .. +232psi) ~ 2,1kg (4.6 lbs) ~ 2,8kg (6.2 lbs)
  • Page 9 °C VN 5030 VN 6030 R 1 1/2“ NPT 1 1/2“ 1.4301 (304) 1.4541 (321) 1.4404 (316L) 1.4404 1.4581 (316L) B, L °C -1 .. +16bar -1 .. +16bar (-14.5 .. +232psi) (-14.5 .. +232psi) ~2,1kg (4.6lbs) ~2,8kg (6.2lbs) +2,5kg/m +2,5kg/m (+5.5 lbs per 39.9“) (L) (+5.5 lbs per 39.9“) (L)
  • Page 10 °C VN 5050 VN 6050 R 1 1/2“ NPT 1 1/2“ 1.4301 (304) 1.4541 (321) 1.4404 (316L) 1.4404 B, L 1.4581 (316L) °C -1 .. +6bar (-14.5 .. +87psi) ~ 4,5 kg (9.9 lbs) + 0,5 kg/m (+1.1 lbs per 39.9“) (L)
  • Page 11 VN 1020 165mm (6.5”) 100mm (3.94”) VN 1030 100mm (3.94”) max. 4.000mm (157.5”) VN 1050 100mm (3.94”) max. 7.000mm (276”) VN 2020 235mm (9.25”) 170mm (6.69”) 260mm (10.2”) 195mm (7.68”) VN 2030 170mm (6.69”) max. 4.000mm (157.5”) 195mm (7.68”) VN 2050 170mm (6.69”) max.
  • Page 12 °C 60°C (140°F) 40°C (104°F) process process -40°C 100°C 150°C (-40°F) (212°F) (302°F) -40°C (-40°F) 60°C ø 50mm (140°F) (ø 1.97“) process -40°C 150°C process (-40°F) (302°F) -40°C (-40°F) 60°C (140°F) process process -25°C 80°C (-13°F) (176°F) -25°C (-13°F)
  • Page 13 Sensitivity B g/l A g/l VN 1000 VN 2000 20 / 5 VN 5000 VN 6000 20 / 5 1g/l = 0.06 lb/ft³ (1) Option switching sensitivity > 5 g/ l (0.3 lb/ft³) Bulk material d < 10mm (0.39“)

  • Page 14: Application

    Application VN 1020 VN 2020 VN 5020 VN 6020 200mm max.600N (7.87“) Mech. load of the sensor Protective angle (canopy) in case of high mechanical load...
  • Page 15 VN 1030 VN 2030 VN 5030 VN 6030 < 300Nm α max. L / mm ( ” ) < 5° 4.000 (157.5 ) < 45° 1.200 (47.2 ) > 45° 600 (23.6 ) < 300Nm α Mech. load of the sensor Sliding sleeve: Tighten straining screws with 20Nm...
  • Page 16 VN 1050 VN 2050 VN 5050 VN 6050 max.2kN Mech. load of the sensor...

  • Page 17: Installation

    Assembly Fixing Threads Teflon tape or flat gasket 80Nm Fixing Flanges Gasket...
  • Page 18 Fixing EHEDG 100Nm (1) Certified flush welding socket must be used (2) Metal-metal support without any gap (3) Sealing ring (4) Welding (observe hygiene requirements)
  • Page 19 Alignment (1) Ingress protection IP 66 / IP67...
  • Page 20 Treatment Option: Weather protection cover for Ex only approved for Zone 22...

  • Page 21: Spare Parts

    Spare parts CE / ATEX / CE / ATEX / IEC-Ex: IEC-Ex: VN 1020 VN 5020 VN 1030 VN 5030 ATEX / ATEX / IEC-Ex: IEC-Ex: VN 1050 VN 1050 VN 5050 VN 5050 pl100932 pl100120 pl100932 pl100120 19...230V 50/60 Hz 19...55V DC pl100247 pl100052...
  • Page 22 CE / ATEX / CE / ATEX / IEC-Ex: IEC-Ex: VN 2020 VN 6020 VN 2030 VN 6030 ATEX / ATEX / IEC-Ex: IEC-Ex: VN 2050 VN 2050 VN 6050 VN 6050 pl100930 pl100124 pl100930 pl100124 19...230V 50/60 Hz 19...55V DC pl100193 pl100050 pl100193...
  • Page 23 CE / ATEX / CE / ATEX / IEC-Ex: IEC-Ex: VN 2020 VN 6020 VN 2030 VN 6030 ATEX / ATEX / IEC-Ex: IEC-Ex: VN 2050 VN 2050 VN 6050 VN 6050 pl100931 pl100128 pl100931 pl100128 19...230V 50/60 Hz 19...55V DC pl100194 pl100051 pl100194...

  • Page 24: Electrical Connection

    Electrical connection All electronic modules: Over voltage category II Relay SPDT max. 4mm² (AWG12) 3 4 5 max. 10A, HBC, 250V, T/F AC max. 253V, 4A, 500VA DC max. 253V, 4A, 60W 19...230V +10% 50/60Hz 8VA 19... 50V +10% DC 1,5W 2225Vrms Power supply Isolating voltage...
  • Page 25 Relay DPDT max. 4mm² (AWG12) 3 4 5 7 8 9 max. 10A, HBC, 250V, AC max. 253V, 4A, 500VA DC max. 253V, 4A, 60W 19...230V +10% 50/60Hz 18VA 19... 50V +10% DC 2W 2225Vrms 2225Vrms Power supply Isolating voltage including 10% from EN 61010...
  • Page 26 max. 4mm² (AWG12) max. 0,4A max. 4A HBC, 250V, T/F 18... 50V +10% DC 1,5W Power supply including 10% from EN 61010...
  • Page 27 2-wire without contact max. 4mm² (AWG12) min. 10mA max. 500mA max. 2A < 200ms max. 5A < 50 ms 19...230V +10% max. 4A 50/60Hz 1,5VA / DC 1W HBC, 250V, T/F max. 7V max. 5mA Power supply including 10% from EN 61010...

  • Page 28: Switching Logic

    Switching logic 3 4 5 3 4 5 3 4 5 7 8 9 3 4 5 7 8 9 3 4 5 3 4 5 3 4 5 7 8 9 3 4 5 7 8 9 (1) = Relais SPDT (2) = Relay DPDT (3) = PNP (4) = 2- wire without contact...
  • Page 29 Signal delay (Relay DPDT) 0-30 sec. 0 T1 30 0 T1 30 3 4 5 7 8 9 (1) = level (2) = relay output...

  • Page 30: Maintenance

    Maintenance Cleaning...

  • Page 31: Assembly Vn *020 Separate Housing

    Assembly Separate housing (selection: pricelist pos.26) VN 1020 VN 2020 VN 5020 VN 6020 white VN 1030 VN 2030 shield VN 5030 black VN 6030...

  • Page 32: Atex / Iec-Ex Notes

    ATEX II 1D 1/2D + IEC-Ex t IIIC Da, Da/Db Notes Permitted relative pressure -0,2...+0,1bar (-2.9…+1.45psi) Zone borders VN 1020/1030 VN 2020/2030 VN 5020/5030 VN 6020/6030 VN 1020 VN 1030 VN 1050 VN 2020 VN 2030 VN 2050 VN 5020 VN 5030 VN 5050 VN 6020...
  • Page 33 Ambient temperature max. Surface temperature 80°C (176°F) 120°C (248°F) 90°C (194°F) 120°C (248°F) 100°C (212°F) 120°C (248°F) 60°C 110°C (230°F) 120°C (248°F) (140°F) 120°C (248°F) 120°C (248°F) 130°C (266°F) 130°C (266°F) 140°C (284°F) 140°C (284°F) 150°C (302°F) 150°C (302°F) The data of the table are valid, if it is guaranteed due to the installation that the thread part has a maximum temperature of 80°C (176°F) at normal use.
  • Page 34 Installation VN 1000 VN 2000 VN 5000 VN 6000 A pull relief must be provided Connect with equipotential bonding of the plant...
  • Page 35 ATEX / IEC-Ex: Further Remarks For installation and field wiring the respectively valid installation regulations of the respective country must be observed. Commissioning only with closed lid. Do not remove the lid (cover) while circuits are alive. Before opening the lid take care, that no dust deposits or whirlings are present. The installation has to be carried out in a way, that mechanical friction or impact does not cause sparks between the aluminium enclosure and steel.

This manual is also suitable for:

Vibranivo vn 1050Vibranivo vn 1030Vibranivo vn 2020Vibranivo vn 2030Vibranivo vn 2050Vibranivo vn 5020 ... Show all

Table of Contents