Quick Setup Guide; Getting Started - JVC AV-27F703 - 27" Real Flat TV User Manual

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. This information includes basic instructions
on operating your remote control, making a simple cable/antenna and optional VCR connection
and, finally, information on programming your television's Auto Tuner.
If you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Step One - The Remote Control
The remote control is the key to operating your television's many great features. Before you can
operate your remote control, you first need to install the batteries (included).
Slide the cover on the back of the remote down towards the bottom of the remote control.
Insert two batteries (included) carefully noting the "+" and "–" markings, placing the "–" end in
the unit first. Slide the cover back into place.
Basic Operation
Turn the television on and off by pressing the P
of the remote.
The four key feature buttons at the center of the remote can be
used for basic operation of the television. The top and bottom
buttons will scan forward an back through the available chan-
nels. The right and left buttons will turn the volume up or down.
These buttons are also marked with four arrows and are also
used with JVC's onscreen menu system. You will need to use
these buttons later in the Quick Setup.
The next step is to connect your television to an antenna or
cable.
Note: Illustration of remote control RM-C325G
10
Quick Setup 1
Proceed to Step Two
button at the top right corner
OWER
POWER
MUTING V CHIP
+
CH
VOL
VOL
+
EXIT
C H
PIP OFF
MENU