Freeze; Swap; Source; Ez-Surf - JVC AV-27F703 - 27" Real Flat TV User Manual

Button Functions - PIP

Freeze

Use the F button to lock a single, still image onto the PIP window.
REEZE
• If PIP is off when F
the PIP window.
• If PIP is on when F
is held.

Swap

You can exchange the channel displayed on the main screen for the one shown in the PIP win-
dow by pressing S
WAP
Channel +/- for PIP
Like the main C
HANNEL
the PIP window.
• Direct channel selection with the 10 key pad for PIP is not possible.

Source

You can select the signal source for the PIP window image.
• If the PIP does not have a signal, the window will be blue.
• If you connect a device using the V2 COMPONENT-IN (Y, P
show the V2 COMPOSITE-IN (VIDEO) signal. Use the V2 COMPOSITE-IN to properly dis-
play the PIP signal.
EZ-Surf (AV-27F803, AV-32F803, AV-36F803 only)
EZ-Surf utilizes the PIP window to surf all the available channels so that you don't have to
change your current program to see what else is on TV.
• If the PIP window is off, you can see the channel and XDS only.
NOTES:
• The PIP window is 1 / 9 the size of the full screen.
• PIP will not display blocked channels or programs. A blue screen will display instead.
• You can adjust the PIP window picture the same as the main picture. (See page 37).
48
is pressed, a snapshot of the main screen is taken and placed in
REEZE
is pressed, the image in the window when the button was pressed
REEZE
.
+/- buttons, C
HANNEL
TV V-1
+/- for PIP lets you scan through the channels in
V-2 V-3
B
V-4
, P ), the PIP signal will only
R