Related Manuals for Robot Coupe R 752 V.V
Summarization of Contents
Warranty Information
Limited Commercial Warranty Details
Details Robot Coupe's one-year limited commercial warranty, coverage, and exclusions for product defects.
Important Warning and Safety Precautions
Unpacking Instructions
Carefully remove equipment from packaging and take out all boxes or packets containing attachments or specific items.
Installation Guidelines
Machine must be operated on a clean sturdy counter or table. Keep area around and under machine clear for air circulation.
Electrical Connection Requirements
Check power supply corresponds to identification plate and can withstand amperage. Unit must be connected to grounded outlet with GFCI.
Handling Precautions
Take care when handling blades as they are extremely sharp. Wear cut-proof gloves.
Safe Usage Guidelines
Machine must not be modified. Never tamper with locking/safety systems. Do not put nonfood objects. Do not leave unattended.
Installation and Safety Recommendations
Recommendations concerning installation of variable-speed appliances and protection of persons, including VFD protection and wiring.
Introduction to Robot Coupe Food Processors
Switching on the Machine
Advice on electrical connections, energy saving mode, control panel, and timer for starting the machine.
Assembly Procedures
Instructions for assembling the cutter bowl, blade, and lid onto the motor base.
General Operation Instructions
General operation instructions, including safety precautions and proper assembly before use.
Optional Attachments and Accessories
Information on optional accessories like serrated and fine-serrated blades, and stainless steel twin-blade assemblies.
Cleaning and Care
Cleaning the Motor Base
Never immerse the motor base in water. Clean using a damp cloth or sponge.
Cleaning the Bowl Cutter Attachment
Remove bowl from motor base, clean bowl and blade. Rinse bowl with hot water if desired.
Cleaning the Scraper Arm
Dismantle scraper arm by holding arm and hub, pressing pieces, and turning handle anticlockwise.
Cleaning the Blade Assembly
Optional twin blade assembly is easy to dismantle and clean. Always dry blades well to prevent rusting.
Maintenance and Replacement Parts
Blade Maintenance
Smooth blades can be sharpened. Sharpen monthly with whetstone. Blades are wearing parts.
Scraper Arm Maintenance
Scraper arm equipped with rubber pieces which are wearing parts. Replace them to ensure optimum efficiency.
Motor Seal Maintenance
Check motor seal regularly for wear and tear. Replace annually or every 6 months for intensive use.
Wear Parts: Blades, Combs, Graters
These parts are wearing parts and have to be changed to ensure high quality cutting.
Technical Specifications and Data
Product Weight and Dimensions
Provides net/gross weight and dimensions (inches) for various models.
Working Height and Noise Level
Recommends working height and states noise level on no-load.
Electrical Data and Components
Details motor speeds, intensity, and lists main components for different models.
Electrical Diagrams and Wiring
Provides wiring diagrams, component identification, and safety switch configurations.
Safety Information and Warnings
Blade and Disc Safety Precautions
Blades and discs are sharp. Handle with care. Magnetic safety device and motor braking system.
Thermal Cut-out Protection
Machine stops motor if left on too long or overloaded. Allow to cool completely before restarting.
Essential Safety Reminders
Never override safety systems, insert objects, push ingredients with hands, overload, or run empty.
Ergonomics and Component Weight
Component Weight for Handling
To limit load when cleaning/storing, remove accessories. Max weight of each part is less than 46 lbs.
Service and Support
Contact Information for Service
Check with distributor for local service. Contact factory for return instructions and shipping address.
Need help?
Do you have a question about the R 752 V.V and is the answer not in the manual?
Questions and answers