Connecting An External Monitor - Gateway PLASMA PLASMA User Manual

Connecting an external monitor

A RGB loop-out (labeled RGB Out) lets you connect another RGB monitor. The
RGB loop-out displays the same signal as the RGB In video input source.
To connect your external monitor:
■
Connect the RGB connector on your monitor to the RGB Out connector
on the back of your plasma TV.
The maximum physical display resolution of the external monitor is 640 × 480
when the aspect ratio is set to 4:3, and 852 × 480 when the ratio is set to 16:9.
If the computer's display resolution exceeds these maximums, the external
monitor eliminates the extra dots which results in a loss of detail and picture
clarity.
www.gateway.com
Connecting a computer
33