1. Manuals
  2. Brands
  3. Zonet Manuals
  4. Adapter
  5. ZUC3120
  6. Quick installation manual

Zonet ZUC3120 Quick Installation Manual

Hide thumbs
1
2

Advertisement

Table of Contents

.

♦ Install for Win 98/98 SE/ME

1.
Insert Disk driver into FLOPPY.
2.
Connect USB cable into the host port of USB printer.
Searching Win 98/98 SE /ME Printer driver as follows:
*****
1.
Windows will detect the driver (PARUPL.INF) and shows the USB-Parallel Bridge. Click Next to continue
installation.
2.
Click Next to continue, to copy the needed files to your hard disk.
3.
When Windows finished installing the software required for the new USB-Parallel Bridge, click Finish.

Setting Up the Printer Device

Follow the steps below on how to connect your printer to the USB port of your PC:
1.
Turn off your printer. Plug the Centronics connector of the USB-Parallel printer cable into your printer. If you
have a parallel connected to it, remove the USB-Parallel printer . Turn on the printer afterwards.
2.
Turn on your computer and plug in the USB connector of the USB-Parallel printer into the USB port.
3.
If you have already installed a printer device before, click Start, Settings, Printers. Click right button of your
mouse on the default-installed printer and click on Properties. The Properties dialog box of the installed
printer will appear on your screen.
4.
Click the Details folder tab and change the printer port to LPT2: (USB to Parallel Port).
5.
If you do not have a printer installed yet, click on Start, Settings, Printers, add Printer. The Add Printer
Wizard will start and assist you in installing a new printer device. Select the printer manufacturer and model
name from the list provided by the wizard or use the printer driver diskette supplied with your printer.
Quick Installation Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZUC3120 and is the answer not in the manual?

Questions and answers

Related Manuals for Zonet ZUC3120

Summary of Contents for Zonet ZUC3120

  • Page 1 Quick Installation Guide ♦ Install for Win 98/98 SE/ME Insert Disk driver into FLOPPY. Connect USB cable into the host port of USB printer. Searching Win 98/98 SE /ME Printer driver as follows: ***** Windows will detect the driver (PARUPL.INF) and shows the USB-Parallel Bridge. Click Next to continue installation.
  • Page 2 When prompted which port the printer will use, click on LPT2: (USB to Parallel Port). Follow the succeeding instructions to complete the installation and also run Print Test Page to see if it can print without problems. Uninstalling the Driver Program If in any case you want to remove the USB-Parallel driver program, you can uninstall it by following the steps below: Unplug the USB-Parallel bridge from your PC.

Table of Contents