Download Print this page
NuAire NU-607-400 Operation And Maintenance Manual

NuAire NU-607-400 Operation And Maintenance Manual

Allergard class i animal bedding disposal cabinet

Advertisement

Quick Links

Allergard Class I
Animal Bedding Disposal Cabinet
Models:
NU-607-400 (Series 13)
NU-607-400E (Series 15)
Operation and Maintenance Manual
February, 2019
Revision 16
Manufactured By:
NuAire, Inc.
2100 Fernbrook Lane
Plymouth, MN 55447
Toll-Free: 1-800-328-3352
In Minnesota: (763)-553-1270
Fax: (763)-553-0459
OM0053

Advertisement

loading
Need help?

Need help?

Do you have a question about the NU-607-400 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Shipments
Damaged Shipments
Steps to take upon receiving a damaged shipment.
Installation Instructions
Location
Recommended placement of the cabinet within the laboratory.
Set-Up Instructions
Unpacking and initial setup procedures for the cabinet.
Assembly Members/Parts
Lists all parts required for cabinet assembly.
Electrical Services
Electrical power and circuit protection requirements.
Assembly Instructions
Step-by-step instructions for assembling the cabinet.
Certification Testing Methods and Equipment
Procedures for cabinet certification and testing.
Operating the NU-607
Operator Controls and Indicators
Description of the cabinet's control panel features and indicators.
Flow Gard Operation
Explanation of the Flow Gard monitor and its functions.
Nominal Airflow Calibration
Procedure for calibrating the cabinet's nominal airflow.
Independent High/Low Alarm Calibration
Adjusting the high/low alarm setpoints for the Flow Gard.
Audible Pressure Alarm
Details on the audible alarm activation and silencing.
Operating Guidelines
General Operating Guidance
Protocols for minimizing disruption, room activity, and safe handling.
General Maintenance
Decontamination
Procedures for microbiologically decontaminating the cabinet.
Fluorescent Lamp, Bulb Replacement
Instructions for replacing the cabinet's fluorescent lamp bulb.
Filter Replacement
Guidance on replacing HEPA and sorbent filters.
Motor/Blower Replacement
Procedure for replacing the motor and blower assembly.
Airflow Calibration
Steps for calibrating the cabinet's airflow to specifications.
Filter Integrity Check
Method for performing a scan test on the HEPA filter.
Polycarbonate Material Compatibility
Resistant Chemicals
Chemicals that polycarbonate sheet is resistant to.
Non-Resistant Chemicals
Chemicals that polycarbonate sheet is not resistant to.
Electrical/Environmental Requirements
Electrical
Electrical supply voltage, frequency, and amperage requirements.
Operational Performance
Recommended operating temperature, humidity, and altitude.
Light Exposure
Maximum light intensity specification for the work area.
Installation Category
Defines the overvoltage category for safe installation.
Pollution Degree
Describes the level of conductive pollution in the environment.
Chemical Exposure
Guidance on chemical exposure and material compatibility.
EMC Performance
Electromagnetic compatibility standards classification.