Table of Contents
Advertisement
3.
IDE connector (40-1 pin PRI_IDE)
This connector is for an IDE 100/66 signal cable, a blue connector for the
primary IDE connector on the motherboard
P5Q18L IDE connector
•
•
4-6
P5Q18L
Pin 20 on the IDE connector is removed to match the covered hole on the
Ultra DMA cable connector. This prevents incorrect insertion when you
connect the IDE cable.
Use the 80-conductor IDE cable for Ultra DMA 100/66 IDE devices.
PRI_IDE
PIN1
NOTE:Orient the red markings
on the IDE ribbon cable to PIN 1.
Chapter 4: Motherboard Info
Advertisement
Table of Contents
