Table of Contents
Advertisement
2.6.2
DIMM installation
To install a DDR2 DIMM:
1.
Locate the two DIMM sockets on the motherboard.
2.
Unlock a socket by pressing the retaining clips
outward.
3.
Align a DIMM on the socket such that the notch
on the DIMM matches the break on the socket.
4.
Firmly insert the DIMM into the socket until the
retaining clips snap back in place and the DIMM
is properly seated.
A DIMM is keyed with a notch so that it fits in only one direction. DO NOT force
a DIMM into a socket to avoid damaging the DIMM!
2-12
Chapter 2: Basic installation
Advertisement
Table of Contents
