Biostar TP43D2-A7 - BIOS Bios Manual page 16

TP45D2-A7/TP43D2-A7 BIOS Manual
Resume On PME#
When you select Enabled, a PME signal from PCI card returns the system to Full ON
state.
For this function to work, you may need a LAN add-on card which supports the
Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard to
enable i f applicable.
Options: Disabled (Default) / Enabled
Resume On RTC Alarm
When " Enabled", you can set the date and time at which the RT C (real-time clock)
alarm awak ens the system from Suspend mode.
Options: Disabled (Default) / Enabled
RTC Alarm Date (Days)
You can choose which date the system will boot up.
RTC Alarm Time
You can choose the system boot up time, input hour, minute and second to specify.
Note: If you have change the setting, you must let the system boot up until it
goes to the operating system, before this function will work.
Active State Power-Management
T his item sets the ASPM configuration for the PCI Express devices b efore the
operating system boots. T his f unction is for OS which does not support ASPM.
Options: Disabled (Default) / Enabled
Suspend mode
T he item allows you to select the suspend type under the ACPI operating system.
Options: S1 (POS) (Default)
S3 (ST R)
Auto
Power on Suspend
Suspend to RAM
POS+STR
15