Change Supervisor Password; Change User Password; Boot Sector Virus Protection - Biostar TA780G M2 HP PLUS - BIOS Bios Setup Manual

TA780G M2+/TA780G M2+ HP BIOS Manual
Security
This sub-menu allows you to provide/revise supervisor and user password.
Security Settings
Supervisor Password :Not Installed
User Password :Not Installed

Change Supervisor Password

Change User Password

Boot Sector Virus Protection [Disabled]
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Change Supervisor Password
Setting the supervisor password will prohibit everyone except the supervisor from
making changes using the CMOS Setup Utility. You will be prompted with to enter a
password.
Change User Password
If the Supervisor Password is not set, then the User Password will function in the
same way as the Supervisor Password. If the Supervisor Password is set and the User
Password is set, the "User" will only be able to view configurations but will not be
able to change them.

Boot Sector Virus Protection

This option allows you to choose the VIRUS Warning feature that is used to protect
the IDE Hard Disk boot sector. If this function is enabled and an attempt is made to
write to the boot sector, BIOS will display a warning message on the screen and
sound an alarm beep.
Options: Disabled (Default) / Enabled
BIOS SETUP UTILITY
38
Exit
Install or Change the
password.
Select Screen
Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit