Table of Contents
Advertisement
Motherboard Manual
Smart Fan Calibration
Choose this item and then the BIOS will automatically test and detect the
CPU/System fan functions and show CPU/System fan speed.
Control Mode
This item provides several operation modes of the fan.
Fan Ctrl OFF(℃)
If the CPU/System temperature is lower than the set value, the CPU/
System fan will turn off. The range is from 0~127, with an interval of 1.
Fan Ctrl On(℃)
The CPU/System fan starts to work when CPU/System temperature
arrives to this set value. The range is from 0~127, with an interval of 1.
Fan Ctrl Start Value
When CPU/System temperature arrives to the set value, the CPU/System
fan will work under Smart Fan Function mode. The range is from 0~127,
with an interval of 1.
Fan Ctrl Sensitive
Increasing the value of slope PWM will raise the speed of CPU/System fan.
The range is from 1~127, with an interval of 1.
F. PSI Control
PSI Control is under "Power Configuration" in "Advanced Menu".
This is a convenient feature to control power supply of CPU for the purpose of
saving energy. Moreover, the power status of CPU is shown by the 4 LEDs.
When PSI Control is enabled, the system can control power supply of CPU
automatically according to system loading. That is, the whole 4 LEDs or only
part of them will shine; when the function is disabled, the system provides full
power for CPU. In other words, the LEDs will shine together.
Main
Advanced
Advanced Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
> CPU Configuration
> SuperIO Configuration
> Hardware Health Configuration
> Smart Fan Configuration
> Power Configuration
> USB Configuration
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
26
BIOS SETUP UTILITY
PCIPnP
Boot
Chipset
T-Series
Exit
Configure CPU.
Select Screen
Select Item
Go to Sub Screen
Enter
F1
General Help
F10
Save and Exit
ESC
Exit
Advertisement
Table of Contents
