Boot Device Priority; Hard Disk Drives - Biostar N68S3B - BIOS Bios Manual

N68S3B BIOS Manual
Full Screen LOGO Show
T his item allows you to enable/disable Full Screen LOGO Show function.
Options: Enabled (Default) / Disabled
AddOn ROM Display Mode
T his item sets the display mode for option ROM.
Options: Force BIOS (Default) / Keep Current
Bootup Num-L ock
Selects the NumLock State after the system switched on.
Options: ON (Default) / OFF
Interrupt 19 Capture
When set to Enabled, this item allows the option ROMs to trap interrupt 19.
Options: Disabled (Default) / Enabled
BOOT SUCCESS BEEP
When this item is set to Enabled, BIOS will let user know boot success with beep.
Options: Enabled (Default) / Disabled
Ignore Memory Error Messages
When set to Enabled, the POST will ignore memory error messages.
Options: Disabled (Default) / Enabled
Boot De vice Priority
Items in this sub-menu specify the boot device priority sequence from the available
devices. T he number of device items that appears on the screen depends on the
number of devi ces installed in the system.
Options: Removable / Hard Disk / CDROM / Legacy LAN / Disabled

Hard Disk Drives

T he BIOS will attempt to arrange the hard disk boot sequence automatically.
can also ch ange the booting sequence.
the screen depends on the number of devices installed in the system.
Options: Pri. Master / Pri. Slave / Sec. Master / Sec. Slave / USB HDD0 /
USB HDD1 / USB HDD2 / Bootable Add-in Cards
T he number of device items that appears on
24
You