Table of Contents
Advertisement
G31-M4 BIOS Manual
AMI OEMB table
Set this value to allow the ACPI BIOS to add a pointer to an OEMB table in the Root
System Description T able (RSD T ) table.
Options:
Enabled (Default) / Disabled
Headless mode
T his is a server-speci f ic feature. A headless server is one that operates without a
keyboard, monitor or mouse. To run in headless mode, both BIOS and operating
system (e.g. Windows Server 2003) must support headless operation.
Options:
Disabled (Default) / Enabled
Energy Lake Feature
T his item allows you to enable or disable the Energy Lake technology feature.
Options:
Disabled (Default) / Enabled
APIC ACPI SCI IRQ
T his item is used to set APIC ACPI SCI by IRQ.
Options:
Disabled (Default) / Enabled
USB Dev ice Wakeup from S3/S4
T his item allows you to enable or disabled the USB resume from S3/S4 function.
Options:
Disabled (Default) / Enabled
High Performance Event Timer
T his item allows you to enable or disabled the HPET.
Options:
Disabled (Default) / Enabled
HPET Memory Address
Options:
Options: FED00000h (Default) / FED01000h / FED02000h / FED03000h
Resume On PME#
When you select Enabled, a PME signal from PCI card returns the system to Full ON
state.
For this function to work, you may need a LAN add-on card which supports the
Wake on LAN function. Set the Wake on LAN (WOL) jumper on motherboard to
enable i f applicable.
Options:
Disabled (Default) / Enabled
13
Advertisement
Table of Contents
