Download Print this page

Advertisement

SERVICE MANUAL
Ver. 1.0 2017.01
Name (Model name)
Focal length (mm)
35mm equivalent
focal length*¹ (mm)
Lens groups-elements
Angle of view*²
Minimum focus*³ (m (feet))
Maximum magnification (×)
Minimum aperture
Filter diameter (mm)
Dimensions
(maximum diameter × height)
(approx., mm (in.))
Mass (approx., g (oz))
(excluding tripod collar)
Shake compensation function
For further information on compatibility with the tele
converter (sold separately) and specifications used
with the tele converter, visit the web site of Sony
in your area, or consult your dealer of Sony or local
authorized service facility of Sony.
9-896-802-11
Sony Corporation
2017A33-1
©
2017.01
Published by Sony Techno Create Corporation
SELP18110G
(E 4/PZ 18-110 G OSS) (E PZ 18-110mm F4 G OSS)
SPECIFICATIONS
*¹ This is the equivalent focal length in 35mm format
E PZ 18-110mm
when mounted on an Interchangeable Lens Digital
F4 G OSS
Camera equipped with an APS-C sized image sensor.
SELP18110G
*² Angle of view is the value for Interchangeable Lens
18-110
Digital Cameras equipped with an APS-C sized image
27-165
sensor.
*³ Minimum focus is the distance from the image sensor
15-18
to the subject.
76°-14° 30'
0.4-0.95
Depending on the lens mechanism, the focal length
(1.31- 3.12)
may change with any change in shooting distance. The
0.122
focal lengths given above assume the lens is focused
at infinity.
f/22
95
Included items
110 × 167.5
(The number in parentheses indicates the number of
(4 3/8 × 6 5/8)
pieces.)
Lens (1), Rear lens cap (1), Lens hood (1),
1,105 (39)
Lens case (1), Zoom pin (1), Lens cap (1),
Set of printed documentation
Yes
Design and specifications are subject to change
without notice.
and
INTERCHANGEABLE LENS
Canadian Model
Chinese Model
are trademarks of Sony Corporation.
US Model
AEP Model
E-mount

Advertisement

loading
Need help?

Need help?

Do you have a question about the Alpha E PZ 18-110mm F4 G OSS and is the answer not in the manual?

Questions and answers

Summarization of Contents

1. SERVICE NOTE
1-1. CHEMICALS
Precautions for handling and storing volatile chemicals during servicing.
1-2. EXTERIOR PARTS
Guidelines for cleaning and handling exterior parts of the lens.
1-3. UNLEADED SOLDER
Information and precautions for using unleaded solder.
1-4. SAFETY CHECK-OUT
Procedures for safety checks after repair before releasing to customer.
1-5. NOTE ON REPLACEMENT OF OPTICAL BLOCK FOR SERVICE
Procedure for replacing the optical block for service.
1-6. NOTE ON REPLACEMENT OF MAIN BOARD
Procedure for replacing the main board and managing adjustment data.
2. DISASSEMBLY & ASSEMBLY
2-1. CONSTITUTION DIAGRAM
Exploded view illustrating the internal components of the lens.
2-2. DISASSEMBLY
Detailed procedures for disassembling the lens components.
2-3. ASSEMBLY
Step-by-step guide for reassembling the lens components.
3. EXPLODED VIEWS
3-1. FRONT SECTION
Exploded view and part list for the front section of the lens.
3-2. FOCUS RING SECTION
Exploded view and part list for the focus ring section of the lens.
3-3. MOUNT SECTION
Exploded view and part list for the mount section of the lens.
3-4. REAR OUTER SECTION
Exploded view and part list for the rear outer section of the lens.
3-5. MAIN BARREL SECTION
Exploded view and part list for the main barrel section of the lens.
3-6. REPAIR PARTS FOR SERVICE
List of service parts with part numbers and descriptions.
3-7. SELECTION PARTS
Details on selection parts for adjustment, including washers and cam followers.
5. ADJUSTMENTS
5-1. BEFORE STARTING ADJUSTMENTS
Preliminary steps and items to check before starting lens adjustments.
5-2. OPTICAL AXIS CHECK
Procedure for checking and adjusting the optical axis of the lens.
5-3. RESOLVING POWER CHECK
Procedure for checking the photographic resolving power of the lens.
5-4. RESOLVING POWER ADJUSTMENT
Procedures for adjusting lens resolving power by changing washer thickness.
5-5. PERFORMANCE CHECK (IMAGE SHAKING/JUMPING)
Procedure for checking image shaking and jumping performance.
5-6. E-MOUNT LENS ADJUSTMENT
Guide for installing and performing E-mount lens adjustments using specific software.