Related Manuals for Raz SP600
Summarization of Contents
Safety Precautions
Forward Stability
Critical for tip prevention; correct caster lock usage is emphasized.
Lateral Stability
Avoids leaning over edges or using on slopes to prevent tipping.
Rearward Stability
Highlights the need for anti-tippers on the SP600 for stability on inclines.
Ramps and Inclines
Guidelines for using ramps, including slope limits and attendant needs.
Immersion Warning
Chair is not for immersion; water contact can cause damage.
Chlorine Exposure
Avoid storing near pools to prevent rust from chlorine.
Transfers
Transferring onto AP600
Securing the AP600 chair with locked casters for safe transfers.
Transferring onto SP600
Securing the SP600 chair with locked casters and wheel locks for safe transfers.
Product Use and Cautions
Intended Use Guidelines
Specifies approved uses for showering, toileting, and personal hygiene.
Heat Exposure Caution
Warns that components can heat up, posing a burn risk.
Installation Procedures
Front Seat Bracket Installation
Step-by-step guide for installing front seat brackets, with emphasis on manual installation.
General Information
Chair Overview
Visual diagram and labeling of key components of the mobile shower commode chairs.
Technical Specifications
Detailed measurements, weight capacity, materials, and turning circle for models.
Set-Up: Dealer Use Only
Backrest Installation
Instructions for attaching the backrest to the chair frame using screws and locknuts.
Seat Installation
Procedure for attaching the seat to the chair frame using spring brackets.
Caster Installation
Steps to insert and secure casters using snap-pins into frame tubes.
SP600 Wheel Installation
Guide for installing rear wheels on the SP600 model with axle bolts.
Footrest Installation
Instructions for inserting footrest hanger tubes into frame receivers.
Fastener Installation
Guidance on secure fastener installation and locknut integrity.
Adjustments: Dealer Use Only
Backrest Angle Adjustment
How to change the backrest angle by repositioning screws and locknuts.
Back Upholstery Tension
Adjusting strap tension on the back upholstery for lumbar support.
Molded Seat Adjustment
Procedure for adjusting the seat's fore/aft position and re-securing it.
Seat-To-Floor Height
Instructions for adjusting chair height using caster extensions or rear wheels.
SP600 Rear Wheel Position
Adjusting the fore/aft position of the rear wheels on the SP600 model.
Wheel Lock Adjustment
Calibrating wheel locks on the SP600 to ensure proper stopping.
Footrest Height Adjustment
Adjusting the vertical length of the footplate extension tubes.
Use and Operation
Back Upholstery Installation
Guide for installing and adjusting the multi-position back upholstery straps.
Molded Seat Features
Details the contoured seat, IPAS system, and available configurations.
Casters Operation
Explanation of the dual-lock feature on casters for locking and unlocking.
Footrest Operation
How to insert, adjust, rotate, and remove adjustable footrests.
SP600 Wheel Locks
Instructions for engaging and disengaging wheel locks on the SP600 for stability.
Commode Pan Use
Information on the commode pan's design, splash reduction, and removal.
Cleaning and Maintenance
Cleaning After Each Use
Procedures for cleaning the commode pan and seat after every use.
Cleaning As Needed
Methods for cleaning upholstery, frame, and components when necessary.
Suggested Cleaning Products
Recommendations for cleaning agents suitable for different parts of the chair.
Limited Warranty
Warranty Terms and Limitations
Details warranty coverage, period, exclusions, and limitations for the product.
Contacts and Disposal
Manufacturer and Distributor Info
Contact details for Raz Design Inc. and Dynamic Health Care Solutions.
Product Disposal Guidelines
Instructions for environmentally responsible disposal of the product.
Need help?
Do you have a question about the SP600 and is the answer not in the manual?
Questions and answers