Kw Radar Processor Connectors - NorthStar 6 KW RADAR Installation Manual

3.5

6 kW radar processor connectors

There are four interface connectors on the rear of the 6 kW radar processor, plus a chassis Earth.
You can connect the radar processor to either the Northstar 6000i or 6100i OR to the Northstar 8000i,
but not to both simultaneously.
6 kW radar processor - connectors
Connector name
Network
Power (+ve and -ve)
NMEA / Comms
Scanner
Chassis Earth
20
Connector function
Ethernet communications for
the 8000i
Power input
Data communications (for
the 6000i and 6100i systems
only)
Remote power control, relay
and ignition (for the 6000i,
6100i, and 8000i)
NMEA communications for
compass (for the 8000i only).
Scanner communications
Grounding point
Connects to...
8000i network, using the 8000i
network cable (NS00481X)
Ship's power 12 V or 24 V DC
ONLY (using the power cable)
6000i or 6100i display unit, using
radar communications cable
(NS003107/NS003108)
6000i, 6100i, or 8000i remote
power signals, relay or ignition;
cable not supplied
8000i NMEA compliant compass;
cable not supplied
Scanner, using the
interconnection cable
(NS003104)
Vessel's Ground using ground
wire
Northstar 6 kW Radar Installation Manual