Kw Radar Processor Connectors - NorthStar 4 KW RADAR Installation Manual

The front view of the 4 kW interconnection cable is shown above.
4 kW interconnection cable pin details
Pin Signal Name
1 2 A Input DC power
2 2 A Input DC power
3 1 A Input DC power
4 1 A Input DC power
5 VDE
6 No connection
7 No connection
8 No connection
9 COM(+)
10 VD
11 No connection
12 BZ
13 COM(-)
14 TIE
15 TI
16 BP
Shell
4.4

4 kW radar processor connectors

There are four interface connectors on the front of the 4 kW radar processor, plus a Chassis Earth.
20
Description/Remarks
Isolated Ground
Isolated Ground
Isolated DC 10.8 V to 42 V
Isolated DC 10.8 V to 42 V
Video Return Coax return
Not used
Not used
Not used
COM PORT RS485
Video Output Coax cable
@-2 V=100 dB
Not used
Bearing Zero BZ - HDG Flash -
open collector
COM PORT RS485
Trigger Return Shield return
Trigger Shield cable @ 1/PRF
Bearing Pulse 2048
pulses/rotation
Color AWG size
Blue (big) #16
Purple (big) #16
Red (big) #16
Yellow (big) #16
Drain wire (Coax line) #24
No connection
No connection
No connection
Yellow (thin) #24 twist pair
Clear Coax line #24
No connection
Green (thin) #24
White (thin) #24 twist pair
Drain wire #24
Shield line #24
Orange (medium) #18
Braid shield
Northstar 4 kW Radar Installation Manual