ACRONIS TRUE IMAGE SERVER 8.0 User Manual page 65

Creates a log file of the current operation with the specified file name.
3. list
Lists the available drives and partitions.
Options
/filename:[filename]
Lists the image file contents.
/password:[password]
Specifies the password for the image file (if required).
4. clone
Clones a hard disk.
Options
/harddisk:[disk number]
Specifies a source hard disk which will be cloned to the new hard disk.
/target_harddisk:[disk number]
Specifies the target hard disk number where the source hard disk will be cloned.
5. explore
Connects an image file as a virtual drive.
Options
/filename:[image file name]
The image file name.
/password:[image password]
The password for the image file (if required).
/partition:[partitions list]
Specifies a list of partitions to be mounted as virtual drives. Without this option, all
partitions stored in the image file will be plugged.
/letter
Assigns letters to the mounted drives. This option is used with /partition option
only.
/net_user:[username]
Specifies a user name when exploring an image from a network drive.
/net_password:[password]
Specifies a user password when exploring an image from a network drive.
Copyright © Acronis, Inc., 2000-2005
Command-line mode and scripting
65