Related Manuals for Haas TL-3B
Summarization of Contents
Safety Guidelines
Workholding Safety
Focuses on safe practices for workholding devices, ensuring machine and operator safety.
Machine Installation
Shipping Bracket Removal
Step-by-step guide to remove shipping brackets from TL-1/2/3 and TL-4 models.
Leveling Procedure
Instructions for initial machine leveling using a machinist's level parallel to the X-axis.
Electricity Requirements
Connecting Lathe to Power
Guidance on connecting the machine to the electrical supply, including breaker and wire specifications.
Machine Operation
Power Up Procedure
Steps to power on the lathe and initiate automatic axis homing for operation.
Optional Tailstock Operation
Instructions for positioning and operating the optional tailstock on TL-4 models.
Optional Tool Turret Removal/Reinstallation
Detailed procedures for removing and reinstalling various optional tool turrets (TT-4, TT-20, TT-10).
Manual Mode Operation
Guide to operating the lathe using hand wheels and pendant jog controls.
Machine Position Display
Explanation of different machine coordinate display modes (POS-OPER, POS-WORK, POS-MACH, POS-TO GO).
Tool Offset Settings
Defines parameters for tool offsets including number, wear, radius, and taper compensation.
Automatic Mode Operation
Steps for setting tool offsets and starting automatic machining operations.
IPS Recorder Functionality
How to use the IPS recorder to input G-code into programs.
Alarms and Messages Display
Guide to viewing active alarms, historical alarms, and operator messages on the control.
Machine Maintenance
Lubrication Procedures
Details manual lubrication points for linear guides, ball screws, and tailstock quill with grease.
Chip Filter Maintenance
Instructions for checking and cleaning the chip filter, typically part of the Coolant Pump Kit.
Need help?
Do you have a question about the TL-3B and is the answer not in the manual?
Questions and answers