Table of Contents
Advertisement
7.3.9 Changing the restored partition size and location
You can resize and relocate a partition by dragging it or its borders with a mouse or by
entering corresponding values in the appropriate fields.
Using this feature, you can redistribute the disk space between partitions being restored.
In this case, you will have to restore the partition to be reduced first.
These changes might be useful if you are to copy your hard disk to a new, high-capacity
one by creating its image and restoring it to a new disk with larger partitions.
7.3.10 Assigning a letter to the restored partition
Acronis True Image Echo Enterprise Server will assign an unused letter to a restored
partition. You can select the desired letter from a drop-down list. If you set the switch to
No, no letters will be assigned to the restored partition, hiding it from OS.
You should not assign letters to partitions inaccessible to Windows, such as to those other
than FAT and NTFS.
7.3.11 Restoring several disks or partitions at once
During a single session, you can restore several partitions or disks, one by one, by
selecting one disk and setting its parameters first and then repeating these actions for
every partition or disk to be restored.
If you want to restore another disk (partition), select Yes, I want to restore another
partition or hard disk drive. Then you will return to the partition selection window
(7.3.4) again and will have to repeat the above steps. Otherwise, do not set this switch.
7.3.12 Using Acronis Universal Restore
Acronis Universal Restore is an add-on to Acronis True Image Echo Enterprise Server. It is
purchased separately and installed from a separate setup file. The following is true for
Acronis True Image Echo Enterprise Server installations including Acronis Universal
Restore.
93
Copyright © Acronis, Inc., 2000-2009
Advertisement
Table of Contents
Need help?
Do you have a question about the TRUE IMAGE ECHO - ENTERPRISE SERVER and is the answer not in the manual?