Acronis Group Server Options - ACRONIS TRUE IMAGE ECHO - ENTERPRISE SERVER User Manual

To stop or restart the task execution, use the Stop or Restart toolbar items. The task
schedule, if created, remains valid.
For a group task that is not currently being executed on either computer, the following
operations are also available:
Run now - an instant task start command. The task schedule, if created, remains valid.
Check – the group server will connect in turn to all computers involved in the group task
and check if the child tasks are intact on the computers so that the group task can run
effectively. The result will be displayed.
When managing a group task, enter the same username and password you entered when
created the task.

4.4.4 Acronis Group Server options

Acronis Group Server regularly polls computers included in its database for their status
4.4.1 Group status display.
(Ready, Offline and so on, according to ) The default interval
between enquires is 2 seconds. You have an option to set the status refresh rate based
on your network requirements.
There is usually no need to refresh the view at all when the console is disconnected from
the group server. A separate option allows you to disable the polling on console
disconnection or set a wider interval between packets.
There is also an option to stop scanning network for newly connected computers. This
can speed up operations with the computers already discovered. After the scanning is
disabled, Acronis Group Server stops sending the packets, but the response may come to
the packets already sent. Therefore, some computers may be added to the computer list
after scanning is disabled. This is not a malfunction.
51 Copyright © Acronis, Inc., 2000-2009