ACRONIS TRUE IMAGE ECHO - ENTERPRISE SERVER User Manual page 153

/net_src_user:[password]
/net_user:[username]
/net_user:[password]
Convert
/target_filename:[file
name]
/harddisk:[disk number]
/vm_type:[vmware|esx|Micro
soft|parallels]
/ur
/ur_path:[path]
List
/filename:[file_name]
Explore
153
Specifies the password for logon to network share to access the
source archive
Specifies the username for logon to network share to save the
resulting archive
Specifies the password for logon to network share to save the
resulting archive
Specifies the path to and name of the virtual disk file to be created.
The file extension corresponds to the type of the virtual machine to
which the virtual disk will be added:
VMware virtual machine - .vmdk
MS virtual machine and Citrix XenServer - .vhd
Parallels virtual machine - .hdd.
Specifies the hard disks to convert by numbers. For each disk, a
separate virtual disk will be created.
By specifying
/harddisk:DYN
you will convert all dynamic volumes that present in the system.
The type of the virtual machine to which the virtual disk will be
added.
Use when converting image of a disk, containing Windows, and the
resulting virtual disk is supposed to be bootable. With this key, the
program will add drivers, necessary for the virtual machine type
selected with
/vm_type
image was taken from a virtual machine of the same type, normally
the key is not needed.
Drivers for the virtual machine reside in the storage, defined by the
registry
HKEY_LOCAL_MACHINE\SOFTWARE\Acronis\UniversalRestore\Drive
rsPackPath. In case the storage has been moved, please change the
key or use the command
The same as with custom path to the virtual machine drivers
/ur
storage.
With this option, the image contents is displayed.
When listing image contents, partition numbers may not coincide
with those in the drives/partitions list, if the image does not contain
all the disk partitions. For example, if the image contains partitions
2-3 and 2-5, they will be listed as 2-1 and 2-2.
If the
deploy /partition
image by its physical number, use
image> /target_partition:<physical number of the target
keys. For the above example, to restore partition 2-5
partition>
to its original place use:
/partition:2-2 /target partition:2-5
key, to the resulting virtual disk. If the
/ur_path:[path].
command cannot find a partition in the
/partition:<number in the
.
Copyright © Acronis, Inc., 2000-2009
key