Recovering Md Devices And Logical Volumes - ACRONIS Backup & Recovery 10 Advanced Server Virtual Edition User Manual

dmesg lvm
dmraid mdadm
e2fsck mkdir
e2label mke2fs
echo mknod
egrep mkswap
fdisk more
fsck mount
fxload mtx
gawk mv
gpm pccardctl
grep ping
growisofs pktsetup
grub poweroff
gunzip ps
halt raidautorun
hexdump readcd
hotplug reboot

6.10.5 Recovering MD devices and logical volumes

To recover Linux Software RAID devices, known as MD devices, and/or devices created by Logical
Volume Manager (LVM), known as logical volumes, you need to create the corresponding volume
structure before starting the recovery.
You can create the volume structure in either of the following ways:

Automatically in Linux-based bootable media by using the management console or a script—see
Creating the volume structure automatically (p. 264).

Manually by using the lvm utility—see Creating the volume structure manually (p. 265).
6.10.5.1 Creating the volume structure automatically
Suppose that you saved the volume structure to the /etc/Acronis directory—see Backing up LVM
volumes (Linux) (p. 45)—and that the volume with this directory is included in the archive.
To recreate the volume structure in Linux-based bootable media, use either of the methods
described below.
Caution: As a result of the following procedures, the current volume structure on the machine will be replaced
with the one stored in the archive. This will destroy the data that is currently stored on some or all of the
machine's hard disks.
264
ssh
sshd
strace
swapoff
swapon
sysinfo
tar
tune2fs
udev
udevinfo
udevstart
umount
uuidgen
vconfig
vi
zcat
Copyright © Acronis, Inc., 2000-2010