Table of Contents
Advertisement
DDS
Dehumidifier for exposed installation swimming pools
DCS
Piped dehumidifier for technical compartment
installation swimming pools
DVS
Vertical dehumidifier for exposed installation swimming
pools
DOS
Horizontal dehumidifier for false ceiling installation
swimming pools
www.hidew.it
info@hidew.it
INSTALLATION, USE AND
MAINTENANCE MANUAL
Advertisement
Table of Contents
Related Manuals for HiDew DOS
Summarization of Contents
1.6 General Safety Rules
1.6.1 Wearing Protective Clothing
Operators should wear safety equipment such as gloves, helmet, safety glasses, safety footwear and cap.
1.6.2 Fire Extinguisher and First Aid
Place a first aid box and a fire extinguisher near the unit. Check their status and accessibility.
1.6.3 Safety Data Plate and Warnings
Safety data plate symbols and general advice for maintenance.
2 Product Description
2.1 Components Overview
Details on the unit's structure, refrigerant circuits, and ventilation systems, including materials and components.
3 Control
3.1 Buttons
Explanation of the function of each button on the control panel: ON/OFF, EXIT, MENU, UP, OK, DOWN.
3.7 Other Pages
3.7.1 Off and Stand-by Page
Page for turning the machine on/off and information on the automatic stand-by mode.
3.7.2 Software Version and Password
View software version, serial number, and access password-protected parameters.
4 Technical Data
4.1 DDS - DCS Technical Data Tables
Technical data tables for DDS and DCS models, including capacity, airflow, power, dimensions, and refrigerant.
5 After-Sales
5.1 Troubleshooting
List of common faults, their possible causes, and recommended corrective actions for unit malfunctions.
5.2 Ordinary Maintenance
5.2.1 Cleaning/Replacing Air Filters
Instructions for cleaning or replacing air filters, including warnings about proper handling and maintenance.
5.3 Extraordinary Maintenance
5.3.1 Condensate Tray and Drain Pipe Cleaning
Procedures for cleaning the condensate tray and drain pipe for DDS, DCS, DVS, and DOS units.
6 Dismantling of the Unit
6.1 Ambient Protection
Information on handling refrigerants and disposing of unit parts in compliance with environmental laws.
7 Installation
7.1 Preamble and Unit Identification
General installation prep: inspection, lifting, unpacking, and unit identification.
7.2 Positioning and Space Requirements
Guidelines for unit positioning and required clearance spaces for DDS, DCS, DVS, and DOS models.
7.3 Hydraulic Connection
Mandatory requirements and recommendations for implementing the hydraulic circuit and its components.
7.4 Electrical Connection
Procedure for connecting the unit to the electrical supply, including wiring and switch recommendations.
7.5 First Start, Calibration, and Configurations
Procedures for first start-up, calibration, and initial configurations, to be performed by specialist personnel.
8 Dimensional Drawings
8.1 DDS Models
Dimensional drawings for DDS models, including various sizes.
8.2 DCS Models
Dimensional drawings for DCS models, covering different capacity ranges.
8.3 DVS Models
Dimensional drawings for DVS models, specifically for sizes 70-90-100 and 160-190-210-230.
8.4 DOS Models
Dimensional drawings for DOS models, including sizes 70-90-100 and 160-190-210-230.
Need help?
Do you have a question about the DOS and is the answer not in the manual?
Questions and answers