Dell PowerVault MD3600i Getting Started Manual page 8

• If multiple NICs are installed on a host, it is recommeded that you use
different subnets for management and iSCSI data links.
• Before connecting any cables between the host server and storage array,
physically label each port and connector.
• Always follow proper power-up and power-down procedures when cycling
power across the network. You must also ensure that critical network
components are on separate power circuits.
NOTE:
The illustrations in this document show cabling for only one PowerVault
MD36xxi storage array in a SAN environment. The illustrations also show only the default
IP addresses for the PowerVault MD36xxi storage array. To cable more than one
PowerVault MD36xxi storage array in a SAN environment, see the Deployment Guide.
6
Getting Started With Your System