Technical Specifications - Dell PowerVault MD3600i Getting Started Manual

Technical Specifications

Drives
PowerVault MD3600i
PowerVault MD3620i
RAID Controller Modules
RAID controller modules
Back-Panel Connectors (Per RAID Controller Module)
iSCSI connectors
SAS expansion connector
Serial connector
Management Ethernet connector
Expansion
PowerVault MD36xxi
20
Getting Started With Your System
Up to twelve 3.5-inch SAS hot-swappable
hard drives (3.0 Gbps and 6.0 Gbps)
Up to twenty four 2.5-inch SAS
hot-swappable hard drives (3.0 Gbps and
6.0 Gbps)
• One or two hot-swappable modules
with temperature sensors
• 2 GB of cache per controller
Two 10 GB iSCSI IN connectors to
connect hosts
One SAS OUT port for expansion to an
additional PowerVault MD12xx enclosure.
NOTE:
SAS connectors are SFF-8088 compliant.
One 6-pin mini-DIN connector
NOTE:
For technical support use only.
One 100/1000 Base-T port Ethernet for
out-of-band management of the enclosure
Supports a maximum of 96 hard drives with
any combination of PowerVault MD1200 or
PowerVault MD1220 expansion enclosures.
NOTE:
You cannot use more than seven
expansion enclosures.
Redundant path connectivity provides
redundant data paths to each hard drive.